help with wheel bearing install

Reply Subscribe

Thread Tools

Search this Thread

07-01-2003 | 11:22 PM

EJ25RS

Thread Starter

Registered User

iTrader: (1)

Joined: Jan 2003

Posts: 606

From: SF Bay Area

Car Info: 2001 RS

help with wheel bearing install

can anyone give me tips and what tools i need, on replacing the wheel bearings, this is my first time trying to fix something myself cause i cant afford $700 from the dealer to replace it ....

07-02-2003 | 12:35 AM

Joe Longworth

Guest

Posts: n/a

Sealed wheel bearings don't go out all that often - regardless of Subaru's history. The simplest route to this is to buy a used complete hub assembly from a junkyard that offers a 30 day warrantee.

Then it's just a matter of a 32mm nut (I think) and a breaker bar for loosening the 145 lb/ft of torque..

07-02-2003 | 04:09 PM

ImprezaRSDriver

Registered User

iTrader: (2)

Joined: Nov 2002

Posts: 955

From: Mann Engineering, Santa Clara, CA

Car Info: 13BRZ, 11FXT, 08T25, 07STI, 02WRX

Either that or you need a bearing press to get the bearing out of the hub. Also you need one to get the new bearing back in.

03-27-2004 | 05:50 PM

five_meo_dipt

Guest

Posts: n/a

both my bearings went out on my 02 wrx

03-28-2004 | 07:42 PM

useful

Registered User

Joined: Mar 2003

Posts: 184

From: Oakland, CA, Bay Area

Car Info: Subaru WRX MY02

bump for a good question. I'd like to know how to do this as well. I might have to do this soon myself. ^_^

Thanks in Advance,

- Ulysses
Subaru WRX 2002

03-29-2004 | 08:02 PM

five_meo_dipt

Guest

Posts: n/a

i just installed used spindles today from lkq cost $30 and had the hub and bearing i think it came with a six month wrnt. it took about an hour to do but now my wheel dose not wiggle
Tire kingdom wanted $500 per side for this

04-04-2004 | 11:04 PM

detroitwrx

Guest

Posts: n/a

I replaced them myself and had a shop press the bearing in for me. I did thid after a winter curbing but the bearing was not pressed in right and in the summer when I put the R compounds on the bearing got loose and went bad. I had to pay the $700 to have it fixed. Bite the bullet and get it done right or get a used one.
Rob