One Stop Perrin Shop!!
02-06-2004, 09:53 PM
#16
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
NEW NEWS ON THE 04 PERRIN SPRINGS!!
Just wanted to give all an update on the status of the 04 Perrin Springs....
We are now down to just 5 of the 10 that we have ordered left!! You can pre-order yours NOW!! Don't wait on these because it will be a while to get them back in stock!!
Let me know if you have any questions about pre-ordering!
Thanks,
Brian
Flash N Dash Performance
Just wanted to give all an update on the status of the 04 Perrin Springs....
We are now down to just 5 of the 10 that we have ordered left!! You can pre-order yours NOW!! Don't wait on these because it will be a while to get them back in stock!!
Let me know if you have any questions about pre-ordering!
Thanks,
Brian
Flash N Dash Performance
02-11-2004, 12:56 PM
#17
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
A FEW NEW PARTS JUST IN!!
Perrin 02 Simulator / CEL Fix for 02-04 WRX & STI!!
Fits all 2002-04 WRX/STi, and Forester XT. Only computerized, active CEL (Check Engine Light) solution compatible with the 2004 WRX STi!!! After the installation of a catless downpipes, your WRX's computer tends to throw a CEL due to a lack of catyltic converter effiency. This simple unit from Perrin eliminates the P0420 service code. This is a perfect complement to a downpipe --Also features an LED to let you know the unit is functioning properly. How cool is that?!?!!?!?!
Price - $65 shipped!!
Perrin Big MAF Intake System
Available Colors: Black, Blue, and Red
PERRIN Performance™ produces an intake system, which is designed to prevent MAF output value from being pegged on heavily modified WRX engines and all 2004 STi with boost increases from stock. When using the factory MAF sensor and adding large amounts of boost the stock MAF sensor will max out and not allow additional compensation for air flow.
• The PERRIN™ "Big MAF" intake system will allow additional airflow to go around the sensor keeping the output value within factory specs.
• High temperature silicone is available in any of our three colors. (Red, Blue, or Black)
• "Big MAF adapter is high polished aluminum.
Includes mounting hardware and instructions
When used in tandem with the PERRIN™ injector modification and aftermarket electronics the "Big MAF" intake will allow the user to add resolution in fuel maps and load columns, compensate air fuel ratio, idle, and wide open throttle maps.
**This intake system must be used with aftermarket electronics.
Fitments include: 2002+ IMPREZA WRX/STI, BAJA TURBO AND FORESTER XT.
Price - $200 shipped!!
Let me know if you have any questions!:banana:
Thanks,
Brian
Flash N Dash Performance
Perrin 02 Simulator / CEL Fix for 02-04 WRX & STI!!
Fits all 2002-04 WRX/STi, and Forester XT. Only computerized, active CEL (Check Engine Light) solution compatible with the 2004 WRX STi!!! After the installation of a catless downpipes, your WRX's computer tends to throw a CEL due to a lack of catyltic converter effiency. This simple unit from Perrin eliminates the P0420 service code. This is a perfect complement to a downpipe --Also features an LED to let you know the unit is functioning properly. How cool is that?!?!!?!?!
Price - $65 shipped!!
Perrin Big MAF Intake System
Available Colors: Black, Blue, and Red
PERRIN Performance™ produces an intake system, which is designed to prevent MAF output value from being pegged on heavily modified WRX engines and all 2004 STi with boost increases from stock. When using the factory MAF sensor and adding large amounts of boost the stock MAF sensor will max out and not allow additional compensation for air flow.
• The PERRIN™ "Big MAF" intake system will allow additional airflow to go around the sensor keeping the output value within factory specs.
• High temperature silicone is available in any of our three colors. (Red, Blue, or Black)
• "Big MAF adapter is high polished aluminum.
Includes mounting hardware and instructions
When used in tandem with the PERRIN™ injector modification and aftermarket electronics the "Big MAF" intake will allow the user to add resolution in fuel maps and load columns, compensate air fuel ratio, idle, and wide open throttle maps.
**This intake system must be used with aftermarket electronics.
Fitments include: 2002+ IMPREZA WRX/STI, BAJA TURBO AND FORESTER XT.
Price - $200 shipped!!
Let me know if you have any questions!:banana:
Thanks,
Brian
Flash N Dash Performance
Last edited by Flash N Dash; 02-11-2004 at 01:05 PM.
02-14-2004, 06:36 PM
#19
Registered User
iTrader: (2)
Join Date: May 2003
Location: Aiea/Waikele
Posts: 332
Car Info: 08 TL Type-S
just wonderin how much the perrin front mount would cost to ship to hawaii zipcode is 96744 also will it fit a cold air intake it looks like the front mount is comin out of the first hole on the left side.
02-14-2004, 11:19 PM
#20
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
WRXYBOY - Shipping to HI would add $110 to the price...it is a big boy! 
Like with most FMIC they would require a short ram intake because the pipe from the FM comes through the opening that would have the cold air intake go down and there is not enough room to sqeeze the two down.
See in this pic they are using the "Short Ram" intake....not a cold air one.
Let me know what you think!
Thanks,
Brian
Flash N Dash Performance
Like with most FMIC they would require a short ram intake because the pipe from the FM comes through the opening that would have the cold air intake go down and there is not enough room to sqeeze the two down.See in this pic they are using the "Short Ram" intake....not a cold air one.
Let me know what you think!
Thanks,
Brian
Flash N Dash Performance
Last edited by Flash N Dash; 02-25-2004 at 01:12 AM.
02-24-2004, 11:12 PM
#24
Registered User
iTrader: (5)
Join Date: May 2003
Location: location location
Posts: 1,661
Car Info: 98 Impreza Outback Sport
The rear sway bar fit earlier years, right? Would it be too stiff (20mm is the lowest, right?) if I have few other mods? I've seen others that adjust from 18-20-22 or something like that. I'm looking for performance upgrades for freeway driving (reduced body roll in corners, etc.)
Also what other parts on the list apply to earlier year imprezas? The crank pulley? thanks in advance
Also what other parts on the list apply to earlier year imprezas? The crank pulley? thanks in advance
02-25-2004, 12:34 AM
#25
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
WRXYBOY - Hey I wish that I could. You need to add $35 to the price for 2nd Day Air to HI. So it would be $215 for it shipped to you. Sorry bud. Please let me know if you would like to go ahead with the order!
scoobsport98 - Hey I assume you have a 98 RS or something right? The Rear Sway bar adjusts from 20-22-24 and it fits Impreza models from 93-04 Sedan, Wagon, WRX, STi. The Front Sway Bars will fit also to the same years just not the STi. The Tunersport Springs will also fit 93-03 Impreza models...this will also help to increase your handling performance in the corners and give a much smoother ride on the freeway then the stock ones. That is really it for suspension fitting for your car.
And yes the Crank Pulley will work for 93+ Impreza's also!
Let me know if you have any other questions!
Thanks,
Brian
Flash N Dash Performance
scoobsport98 - Hey I assume you have a 98 RS or something right? The Rear Sway bar adjusts from 20-22-24 and it fits Impreza models from 93-04 Sedan, Wagon, WRX, STi. The Front Sway Bars will fit also to the same years just not the STi. The Tunersport Springs will also fit 93-03 Impreza models...this will also help to increase your handling performance in the corners and give a much smoother ride on the freeway then the stock ones. That is really it for suspension fitting for your car.
And yes the Crank Pulley will work for 93+ Impreza's also!
Let me know if you have any other questions!
Thanks,
Brian
Flash N Dash Performance
Last edited by Flash N Dash; 02-25-2004 at 12:57 AM.
03-10-2004, 12:06 PM
#26
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
DSMwPSI - Your parts have left the building and you have a tracking number! Thanks again for your continued support and business!!
Thanks,
Brian
Flash N Dash Performance
Thanks again for your continued support and business!!Thanks,
Brian
Flash N Dash Performance
03-16-2004, 10:03 PM
#27
Registered User
iTrader: (3)
Join Date: Aug 2003
Location: Fort Collins, CO
Posts: 103
Car Info: 2003 WRX Sedan
Thanks Brian, for your continued great service, I got the sway bar & endlinks today.
***Bump*** for an excellent vendor, by far one of the best vendors I've dealt with to date. Look forward to doing business with you in the future.
-Jim
***Bump*** for an excellent vendor, by far one of the best vendors I've dealt with to date. Look forward to doing business with you in the future.
-Jim
03-17-2004, 12:50 AM
#28
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
DSMwPSI - Jim, Thanks for your kind words! I do try my best and I am glad to hear that you got your items! Feel free to take pics and post them up if you like!
I look forward to doing business with you in the future as well. If you ever need anything then please do not hesitate to ask! That is what I am here for.
Thanks again for your support!
Brian
Flash N Dash Performance
I do try my best and I am glad to hear that you got your items! Feel free to take pics and post them up if you like!I look forward to doing business with you in the future as well. If you ever need anything then please do not hesitate to ask! That is what I am here for.
Thanks again for your support!
Brian
Flash N Dash Performance
03-23-2004, 07:03 PM
#30
Registered User
Thread Starter
iTrader: (79)
Join Date: Jan 2003
Location: Auburn, AL
Posts: 1,329
Car Info: WR Blue WRX
BIGBSWRX - Ben, Yeah I can give a little better break...maybe $15 off would be the most. Let me know what you think!
Thanks,
Brian
Flash N Dash Performance
Thanks,
Brian
Flash N Dash Performance