MEGA HUGE WRX Part out sale!!!!!
05-18-2006, 04:51 PM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Omaha
Posts: 32
Car Info: 2002 WRX
MEGA HUGE WRX Part out sale!!!!!
Well, after 2 months I have decided to part out my WRX, I am out of money and I cannot wait any longer to sell the car. I am removing most of the mods from the car and selling the car with a few things on it. I think the prices are fair, I am listing everything for about 50% less than it would cost new. As such, I am pretty firm on these prices, but that doesnt mean you cant make me an offer. I plan to remove these parts as they get sold, and payment I would prefer money orders. I will accept paypal, but I will be adding 3% to the price to cover the fees that paypal charges.
Also, this includes the buyer sending me their stock parts to replace the modifications. These parts MUST be in good working condition, I do not want fried parts!. I cannot sell anything, unless I have the stock parts to replace the mods!!! If you are are not local (in and around Omaha, NE) we will figure out something for shipping since I will have to ship the parts, and the buyer will have to send me the stock parts.
Here is a link to the thread with my car for a full mod list, pics, etc.:
Click here
Everything is in perfect working order.
Ok here we go...
APS SR30 Turbo - $1000
APS R Series front mount intercooler (painted black from APS "stealth series") and high flow silicone intercooler piping - $800
HKS equal length header - $700
Unichip piggyback engine management system - $500
APS high flow cold air intake (silicone piping) - $100
APS dual vent blowoff valve - Sold
STi 550cc fuel injectors - $250
Vishnu Performance parallel feed WRX fuel rails - $150
High flow dual inlet fuel pressure regulator - $50
Quantum Racing radiator shield, Fluidyne Aluminum Radiator, Samco upper and lower silicone hoses, and Zero Sports Radiator cap - $500
Setrab oil cooler, Accusump oil accumulator, Canton Mecca oil thermostat, Canton Mecca remote oil filter, Canton Mecca remote oil cooler sandwich adaptor. I will be sending it mounted on the custom built mount and all fittings and stainless steel braided lines needed for installation, will be included. There are pictures of the setup in the other post, and I can send more if requested. - $600
Complete JDM Subaru WRX STi RA Spec C DCCD 6-speed setup (including the 6-speed trans with Suretrac front LSD and driver adjustable center diff, 6-speed prop-shaft, 6-speed lightened flywheel, 6-speed standard clutch, 6-speed shifter, Subaru alloy front control arms, Subaru GDB (STi) spec front axles, ECU for center diff, control dial, and JDM wiring loom. To my knowledge this is just about everything you will need to put the best 6-speed tranny in your WRX. I would prefer to have the buyer actually be able to come to Omaha, as I have someone here who can perform the swap. I will work with someone long distance if necessary. - $5,000
Cusco Zero 2R fully adjustable coilovers - Sold
Cusco rear strut tower bar (carbon fiber) - Sold
Cusco rear triangulation bar (V-brace add-on) - Sold
TWR complete Racing brake package (Front: 4-piston calipers, 332mm 2-piece brake rotors, Rear: 2-piston calipers, 320mm 2-piece brake rotors and stainless steel braided brake lines) - $1800
UK300 headlights - $500
Catz HID conversion kit (works perfectly, just needs a low beam HID bulb, as one recently burned out) - $300
Aqua hood vent (only blue WRX's, as I need a blue hood scoop) - $100
APR carbon fiber mirrors (only blue WRX's, I need stock blue mirrors) - $150
Defi center gauge pod - $100
*All gauges includes sensors*
GReddy electronic boost gauge w/ warning, hold, and memory - $100
GReddy electronic EGT gauge w/ warning, hold, and memory - $100
GReddy electronic Air/Fuel ratio gauge w/ warning, hold, and memory - $150
Autometer A-pillar 3-gauge pod - $45
GReddy Water temp sensor and gauge - $150
GReddy Fuel pressure gauge - $150
GReddy Oil Pressure gauge - $100
GReddy Oil temp. gauge and corner gauge pod - $100
Legend 5 aluminum floor mats - $50
MyChron 3 Auto Gold XG for data acquisition, track mapping, gauge monitoring with alarm settings, sequential shift lights, and more - $500
Nordskog Performance digital GPS speedometer with custom enclosure that mounts in instrument cluster - $300
Sparco Milano (blue microfiber) racing seats (driver and passenger) with sliding custom brackets - $1200
Shroth 6-point racing safety harnessess (driver and passenger) - $400
Amerex A352 Halon 1211 fire extinguisher with Brey Krause bracket - $100
Ok, thats it, please email me at jbrausch23@gmail.com for more info., pics, offers, or questions or you can PM me.
Also, this includes the buyer sending me their stock parts to replace the modifications. These parts MUST be in good working condition, I do not want fried parts!. I cannot sell anything, unless I have the stock parts to replace the mods!!! If you are are not local (in and around Omaha, NE) we will figure out something for shipping since I will have to ship the parts, and the buyer will have to send me the stock parts.
Here is a link to the thread with my car for a full mod list, pics, etc.:
Click here
Everything is in perfect working order.
Ok here we go...
APS SR30 Turbo - $1000
APS R Series front mount intercooler (painted black from APS "stealth series") and high flow silicone intercooler piping - $800
HKS equal length header - $700
Unichip piggyback engine management system - $500
APS high flow cold air intake (silicone piping) - $100
APS dual vent blowoff valve - Sold
STi 550cc fuel injectors - $250
Vishnu Performance parallel feed WRX fuel rails - $150
High flow dual inlet fuel pressure regulator - $50
Quantum Racing radiator shield, Fluidyne Aluminum Radiator, Samco upper and lower silicone hoses, and Zero Sports Radiator cap - $500
Setrab oil cooler, Accusump oil accumulator, Canton Mecca oil thermostat, Canton Mecca remote oil filter, Canton Mecca remote oil cooler sandwich adaptor. I will be sending it mounted on the custom built mount and all fittings and stainless steel braided lines needed for installation, will be included. There are pictures of the setup in the other post, and I can send more if requested. - $600
Complete JDM Subaru WRX STi RA Spec C DCCD 6-speed setup (including the 6-speed trans with Suretrac front LSD and driver adjustable center diff, 6-speed prop-shaft, 6-speed lightened flywheel, 6-speed standard clutch, 6-speed shifter, Subaru alloy front control arms, Subaru GDB (STi) spec front axles, ECU for center diff, control dial, and JDM wiring loom. To my knowledge this is just about everything you will need to put the best 6-speed tranny in your WRX. I would prefer to have the buyer actually be able to come to Omaha, as I have someone here who can perform the swap. I will work with someone long distance if necessary. - $5,000
Cusco Zero 2R fully adjustable coilovers - Sold
Cusco rear strut tower bar (carbon fiber) - Sold
Cusco rear triangulation bar (V-brace add-on) - Sold
TWR complete Racing brake package (Front: 4-piston calipers, 332mm 2-piece brake rotors, Rear: 2-piston calipers, 320mm 2-piece brake rotors and stainless steel braided brake lines) - $1800
UK300 headlights - $500
Catz HID conversion kit (works perfectly, just needs a low beam HID bulb, as one recently burned out) - $300
Aqua hood vent (only blue WRX's, as I need a blue hood scoop) - $100
APR carbon fiber mirrors (only blue WRX's, I need stock blue mirrors) - $150
Defi center gauge pod - $100
*All gauges includes sensors*
GReddy electronic boost gauge w/ warning, hold, and memory - $100
GReddy electronic EGT gauge w/ warning, hold, and memory - $100
GReddy electronic Air/Fuel ratio gauge w/ warning, hold, and memory - $150
Autometer A-pillar 3-gauge pod - $45
GReddy Water temp sensor and gauge - $150
GReddy Fuel pressure gauge - $150
GReddy Oil Pressure gauge - $100
GReddy Oil temp. gauge and corner gauge pod - $100
Legend 5 aluminum floor mats - $50
MyChron 3 Auto Gold XG for data acquisition, track mapping, gauge monitoring with alarm settings, sequential shift lights, and more - $500
Nordskog Performance digital GPS speedometer with custom enclosure that mounts in instrument cluster - $300
Sparco Milano (blue microfiber) racing seats (driver and passenger) with sliding custom brackets - $1200
Shroth 6-point racing safety harnessess (driver and passenger) - $400
Amerex A352 Halon 1211 fire extinguisher with Brey Krause bracket - $100
Ok, thats it, please email me at jbrausch23@gmail.com for more info., pics, offers, or questions or you can PM me.
Last edited by blublurwrx; 05-25-2006 at 09:28 PM. Reason: Items sold
05-19-2006, 07:44 AM
#2
Registered User
iTrader: (1)
Join Date: Dec 2005
Location: Springfield, VA
Posts: 130
Car Info: 2004 wrx
APS dual vent blowoff valve - $100...
Will you accept through Paypal?
i have a 2004 WRX with 17,000 mileage, OE BOV in good condition, i can ship mine
Will you accept through Paypal?
i have a 2004 WRX with 17,000 mileage, OE BOV in good condition, i can ship mine
Last edited by wvinfernovw; 05-19-2006 at 07:46 AM.
05-19-2006, 08:24 PM
#4
Registered User
Thread Starter
Join Date: Mar 2006
Location: Omaha
Posts: 32
Car Info: 2002 WRX
Originally Posted by black02
Are the UK300 headlights for the 2002-2003 model? If so, could you please send pics. PM'd you.
05-19-2006, 08:25 PM
#5
Registered User
Thread Starter
Join Date: Mar 2006
Location: Omaha
Posts: 32
Car Info: 2002 WRX
Originally Posted by wvinfernovw
APS dual vent blowoff valve - $100...
Will you accept through Paypal?
i have a 2004 WRX with 17,000 mileage, OE BOV in good condition, i can ship mine
Will you accept through Paypal?
i have a 2004 WRX with 17,000 mileage, OE BOV in good condition, i can ship mine
05-25-2006, 09:28 PM
#9
Registered User
Join Date: Feb 2005
Location: Waipahu, Hawaii
Posts: 16
Car Info: 2003 WRX
pm sent.. email dizbejraz@hotmail.com
06-07-2006, 11:48 PM
#13
VIP Member
Join Date: Oct 2003
Location: Evansville, IN
Posts: 297
Car Info: 2003 Subaru WRX Aspen White
Originally Posted by blublurwrx
Got my Geniune JDM tail lights for sale now also for $200. Let me know if you want pics, they are in perfect, brand new condition.
hows the fitment with UK300s?
06-16-2006, 07:55 PM
#14
Registered User
Thread Starter
Join Date: Mar 2006
Location: Omaha
Posts: 32
Car Info: 2002 WRX
Originally Posted by biba028
mileage on the sr30 ?
06-16-2006, 07:55 PM
#15
Registered User
Thread Starter
Join Date: Mar 2006
Location: Omaha
Posts: 32
Car Info: 2002 WRX
Originally Posted by testes1010