Hey guys, I have a barely used Greddy Ti-C Catback for sale that came off of my 2005 Subaru WRX. Part number: GR-10167900

This exhaust fits: Subaru WRX 02-05 and Subaru STI 04-05.

I bought the car with the exhaust on it about 1 month ago, and I replaced the Greddy with a Borla Hush to prevent being ticketed by the CHP ****'s here in California.

The exhaust was installed on the car about 6k miles before I bought the car, so it is in excellent/near new condition. I guarantee no scratches, dents or rust. The previous owner had the titanium tip stolen from the exhaust, so he bought a BRAND NEW Greddy titanium tip to replace the stolen one. I placed it on the exhaust only for pictures, and I have never ran the engine with the tip on the exhaust, so it is brand new. Only issue: the 3 screws needed to mount the tip are missing, but you can get any three screws from a hardware store. The removable silencer was ALSO stolen with the tip, so this will not be included. It can be purchased separately for a low cost.

I'm throwing in a brand new 3" exhaust gasket that is required between the catback and your downpipe during installation. Also a Greddy license plate frame is included.


What's included:

* Original Greddy/Trust manufacturers box/packaging
* Greddy Ti-C catback (two pieces) - Part number: GR-10167900
* Titanium blue burnt tip (brand new, never mounted)
* Greddy license plate frame (new condition, no scratches)
* Fibrant Performance 3" exhaust gasket (between catback and downpipe)


============================================

Greddy Racing Ti-C Specs:

TIP:
-Material: Titanium
-Size: 115mm
-GReddy Embossed, with heat treated tip

MUFFLER:
-Material: 443 Stainless Steel
-Application: 3" (turbo applications)
-Canister Size: 160mm
-Compact Power Extreme II design
-Advanced Robotic TIG welding
-High Flow Straight-through design
-Specifically tuned internal construction
-Protective stainless steel mesh
-Propriety composite cube sound suppression

PIPING:
-Material: 409 Stainless Steel
-Sizs: diameter 80mm
-Minimal mandrel-bends for maximum flow

FLANGES:
-Material: 304 Stainless Steel
-Strong, Light-weight pressed flanges

=============================================



For pick up: I live in the middle of the desert in SoCal, so I am willing to drive as far as the San Diego area or meet in the outskirts of the Los Angeles area (Orange County, San Clemente, Riverside, San Bernardino). I'd also be willing to drive to the Yuma, Arizona area or Blythe area if you are in Phoenix. I also go up to Big Bear Mountain often to snowboard on weekends, so I can also meet in this area.

For shipping: I will ship, but it will be at the buyers expense.
If you want it shipped, please PM or post up your zip code for an estimate on shipping cost.

*UPDATE on shipping: I got a FedEx Ground quote (only way I can ship it from where I live) and from me to the furthest two states from me (Maine and Florida) it is $90 for Maine, and $85 for Florida. So that gives you guys an idea. Shipping will NOT be more than $90 and will probably be a lot less if you are on the West Coast.

Asking: $350 picked up

*I prefer Paypal or cash in person. I will do money orders, but I will not ship the item out until the money order is deposited into my bank account.

If interested, post up or PM me.


SOLD!

 

 

 

 

 

 

 

 

 

 

Shipping quote inserted in original thread.
Shipping to anywhere in the U.S. from me (Cali) will be $90 or less.
The closer you are to Cali, the cheaper obviously.
PM me your zip for price quote.

 

sold!