Used Aftermarket Car Parts For Sale Only second hand aftermarket car parts can be listed here by private parties only!

cusco zero2r's rears need rebuilt/ replaced

Thread Tools
 
Search this Thread
 
Old 01-05-2006 | 08:06 PM
  #1  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
cusco zero2r's rears need rebuilt/ replaced

ive had these on my car for just under 8000 miles, when i got them they had 13k on them, the rears now leak and need either replaced or rebuilt. the fronts are in good shape and have new pillowball mounts. which i replaced in early october, pm me with any questions. i also have a v2 brace and an os-t brace for sale which are brand new. 100 for each of those shipped. 600 shipped for the coilovers.

-norm

Last edited by bigworm; 01-31-2006 at 11:13 AM.
Old 01-05-2006 | 08:34 PM
  #2  
Imprezer's Avatar
Admin v2.0
iTrader: (9)
 
Joined: Nov 2002
Posts: 6,965
From: Alameda, CA, USA
Car Info: 02 Black Legacy GT
If those are 2R's, 99.9% they are not leaking. There is an actual bearing inside the body due to the inverted strut design. So, the grease eventually liquifies and sips a bit. It is not the shock that is leaking. And not the seal. You should not worry about it. If you show me a pic, I will tell you for sure.

I have sold over 200 sets of coilovers in US. I am yet to see one come back with shock problems.
Old 01-05-2006 | 09:04 PM
  #3  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
im pretty sure they are leaking but ill get you pics, ill still want to sell them and try something different.
Old 01-05-2006 | 09:16 PM
  #4  
Mr.Carl's Avatar
Registered User
iTrader: (41)
 
Joined: Sep 2005
Posts: 1,115
From: SJSU/Milpitas
Car Info: 99 AW ej205 Coupe // 06 SGM Wagon
Off topic, but do you know if the front pillowball mounts will fit the rears? If so, what's the condition of the front pillowballs that you swapped out?
Old 01-05-2006 | 09:19 PM
  #5  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
they were making a faint noise over big bumps and i couldnt handle it... i dont know if they would fit the rear. sorry, norm
Old 01-05-2006 | 09:26 PM
  #6  
Imprezer's Avatar
Admin v2.0
iTrader: (9)
 
Joined: Nov 2002
Posts: 6,965
From: Alameda, CA, USA
Car Info: 02 Black Legacy GT
You cannot use the front mounts in the rear. The actuall ball is the same, if that is what you are asking.
Old 01-05-2006 | 09:28 PM
  #7  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
thanks alex ill see if ryan can email the pics to you tomorrow they will not be very good though as the coilovers are still on my car =... i cant even drive my car... "for emergency use only, aviod bumps if in use".
Old 01-06-2006 | 10:17 AM
  #8  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
i was told that 800 would be a good price
Old 01-06-2006 | 12:47 PM
  #9  
garface's Avatar
Registered User
iTrader: (1)
 
Joined: Nov 2002
Posts: 175
From: yonkers, ny
Footprint just sold his with an extra set of springs for $1100 if that helps you decide on a price. Fixing ONE corner is $400-$500 so you might be better off keeping them. Can you describe in detail what they are doing that is negative? Bouncing, sounds, etc. Thanks.
Old 01-06-2006 | 12:51 PM
  #10  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
car feels like the rear is bottoming out over bumps. i could part them out and make 800 with the new pillowball mounts, the springs and the fron dampers, all as replacements. bbb ut i would just rather not do that.

Last edited by bigworm; 01-06-2006 at 12:54 PM.
Old 01-06-2006 | 12:58 PM
  #11  
garface's Avatar
Registered User
iTrader: (1)
 
Joined: Nov 2002
Posts: 175
From: yonkers, ny
You think it could be the topmounts? Maybe you should try to replace those in the rear. How much does a set cost? Oh, and what car are these for, 02-04 GD?
Old 01-06-2006 | 01:03 PM
  #12  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
02-05wrx or 04sti ill check those but there are rocks dirt and debris sticking to the damper in the rear so thats why i think its leaking but ill look more into it... its a way more horrible feeling than when the front pillowballs went.

Last edited by bigworm; 01-06-2006 at 01:03 PM. Reason: spelled rocks wrong
Old 01-07-2006 | 06:38 PM
  #13  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
mprezer: do you think it could be the top mounts making it feel like the car is bottoming out ?---also still working on getting the pics to you.

thanks for any help


also willing to go either way on these:
trade these for stock struts and springs and $
or
trade these and $ for bilstien pss9, zeal function v6, whiteline g4....

let me know
Old 01-08-2006 | 08:11 PM
  #14  
bigworm's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2005
Posts: 549
From: Santa Rosa, CA
Car Info: 2002 M3
i think it may just be the camber plates in the rear and the leaking is the grease liquifying like imprezer stated above... but i will know for sure tomorrow, if it is they wont be for sale.

Last edited by bigworm; 01-08-2006 at 08:14 PM.
Old 01-09-2006 | 01:54 AM
  #15  
chickenrice's Avatar
Registered User
 
Joined: Sep 2003
Posts: 40
sorry for the off topic.

i have the cusco 2. it's got this squashing sound everytime i go over a bump.. i just assume that it's blow? the odd thing is it's coming only from the rear. Could anybody advise me on it?

thanks



All times are GMT -7. The time now is 04:32 AM.