steedsta

tell me what you guys think is better for everyday driving and some track days. And does the RA work with the edfc, i cant search because i cant search for RA since its not three letters.
Thanks,
Steve

AWDSupaDrift4U

I would go with the RA since they get more bang for your buck.
the ride with em is a little stiffer too!!!
you can handle the ride its not terrible


the EDFC doesn't work on Subarus with the RA suspension:banana:

steedsta

thanks for the response. whats up with your screen name, why does it have drift in it?:banana:

CTOESHO

I personally would go with the Flex. With the Flex, you can adjust the ride height without affecting the stiffness of the ride.

steedsta

thats what i like about the 2 way adjustable coilovers as in flex, zero2 and the flta2. im going with the flex

steedsta

if i run the ss i cant have the 2 way height adjustable.

steedsta

yes with the ss you can run the edfc

steedsta

1 way height adj. is where you loosten your spring to lower your car and
2 way is where there is a completly seperate setting to lower and raise your car

Tein SS Coilovers

*1-way Height Adjustment

93-01 2.5RS: (Front: -50~-14mm; Rear: -42~-30mm)
Recommended: (Front: -30mm; Rear: -25mm)
02+ WRX/STi: (Front: -80~-32mm; Rear: -44~-24mm)
Recommended: (Front: -66mm; Rear: -33mm)

*Compatible with Tein's EDFC damping controller

*16-level damping adjustment

*Includes main springs and helper springs

93-01 2.5RS: (Front: 7kg, 392 lbs; Rear: 6kg, 336 lbs)
02+ WRX/STi: (Front: 5kg, 280 lbs; Rear: 5kg, 280 lbs)

*2.5 RS kit does not include upper mounts

*WRX/STi kit does include upper mounts



|CLOSE|


Compatible with Tein's EDFC damping controller

steedsta

the springs wont be as stiff, and wont control the car as much as if they were stiffer.