Brake cooling ducts on an 04?
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Fremont-Milpitas-San Francisco, CA
Posts: 186
Car Info: 04 PSM WRX Sedan
Brake cooling ducts on an 04?
I know that some 02 WRXs came with brake cooling ducts, but they were phased out for the 03+ models. I was wondering if the 04 models still have the provisions for the brake ducts (I know the 03 do).
Parts that are needed for this install will run about $20-30, which isn't much considering they will keep the brakes from fading just that bit longer.
59123FE000 (passenger's side duct)
59123FE010 (driver's side duct)
46064AE000 (fastener clip)
Thanks!
Parts that are needed for this install will run about $20-30, which isn't much considering they will keep the brakes from fading just that bit longer.
59123FE000 (passenger's side duct)
59123FE010 (driver's side duct)
46064AE000 (fastener clip)
Thanks!
#2
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
Take a look at the splash guard on your car. On my 02 there is an opening just under the fogs and the splash guard has a channel just behind them. If you have these channels all you have to do is buy the parts and install them over these channels.
#4
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
I don't think you will have them on your 04. You could do this http://www.clubwrx.net/forums/showthread.php?t=90383
Here's the setup on an 02-03 http://www.scoobymods.com/forums/showthread.php?t=1664
Here's the setup on an 02-03 http://www.scoobymods.com/forums/showthread.php?t=1664
Last edited by MO REX; 04-29-2007 at 04:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post