wheres the "tach" wire for remote start ?
#1
wheres the "tach" wire for remote start ?
i got all the wires hooked up but i cant find a "tach" wire for the remote start . the manuals says that its the grey/yellow wire located at ignition coil #1 on the turbo . can anyone help me out ? thanks
#3
Guest
Posts: n/a
tach
according to the sheet i have the tach wire is--
"Tachometer green ac ECM below glove box"
"Notes: On the non-turbo models the tach is in pin 10 of the 35 pin plug. On the turbo modes the tach is in pin 9 of the 24 pin plug. On the STi models the tach is in pin 213 of the 34 pin plug."
i'm not sure what the "ac" is in between green and ECM.
It goes on to say that the tach wire is also found behind the instrument cluster.
Hope this helps. GL
"Tachometer green ac ECM below glove box"
"Notes: On the non-turbo models the tach is in pin 10 of the 35 pin plug. On the turbo modes the tach is in pin 9 of the 24 pin plug. On the STi models the tach is in pin 213 of the 34 pin plug."
i'm not sure what the "ac" is in between green and ECM.
It goes on to say that the tach wire is also found behind the instrument cluster.
Hope this helps. GL
Thread
Thread Starter
Forum
Replies
Last Post
Imprezer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
07-21-2005 06:55 AM