HiGhWaYcHiLd

Here it is,

I just bought a JVC head unit and hooked it up perfectly to the existing wiring, with the directions etc....

I doesnt work, I have power in the wires, its just that I dont have power in the ACC (fused) wire when I turn on the key, and I have some when its off.....

Is there something inverted?

Is there any special trick I should know?

It's a 2002 WRX...

THANKS YOU VERY MUCH IN ADVANCE!

spy gurl

you can try and connect the power (yellow) wit the acc (red)
from the deck to the harness. Then u can power up ur deck when u don't have the key in the ignition.

jrod9707

Ok first off never cut your wires when you can pay $10 for a wire harness.Saves a lot of time and possibly your electrical system. I'd say put the wires back and buy the harness and everything else will be a snap.

WR-Wrex

spend a lil money and get a wire harness.. and don't ever cut your wires. i mean most of the places where u buy your stero will give you free instaltion anywayz...if u just tell them like ....this company is giving free installion..can u match it... most company will do it for u...

well for your problem...u might have your constand wire or your ingination wires mixed around..which is the yellow wire for constant (for like clocks) and the red for igintion (power for deck)
if you have any more question e-mail me

or anyone need car stero e-mail me...