Finally Broke her in!!
#1
VIP Member
Thread Starter
Join Date: Aug 2005
Location: My beer needs an f5 button
Posts: 7,187
Car Info: Meep Meep!
Finally Broke her in!!
teh car that is. Get my first lube job tomorrow, and I was juandering (sorry I couldn't resist) Should I run the rpms before or after the lube... Or does it not matter, so as long as Im 1k+ in milage...
#5
VIP Member
Thread Starter
Join Date: Aug 2005
Location: My beer needs an f5 button
Posts: 7,187
Car Info: Meep Meep!
Originally Posted by kenji815
congrat.. time to turn up the RPM warning light to max. after oil change..
#6
VIP Member
Originally Posted by UberMaus
Just curious, what does everyone consider max?? Right at 7 where the first red line starts? And should I even do that for the first 3k?
I shift at 75 on my RS but the redline is 62
#10
Originally Posted by kenji815
for normal humping i hump in 4..
for normal-hard humping i hump in 6
that's for soggy thou
i found for Ming.. the sweet spot is between 5-6
above 6 it sorta just too deep in..
for normal-hard humping i hump in 6
that's for soggy thou
i found for Ming.. the sweet spot is between 5-6
above 6 it sorta just too deep in..