lot of stuff gots to go.
#1
Guest
Posts: n/a
lot of stuff gots to go.
Revised on 06/27/03
All engine parts are off of 2002 WRX with 26000 miles on it unless it is marked new or other wise.
If U have any question or needing to see the photos, Please PM me....
-Used WRX EJ20 short block. (Number 3 piston is no more, but everything else is in great condition, great build up project.) was 350.00 (NOW 200.00)+shipping
-Used WRX Turbo was 200.00 (NOW 125.00)
-Used WRX ECU (275.00) shipped
-Brand NEW in box, EJ20 + EJ22 (same thing) Pauter billet forged rods. Paid 750.00 (selling for 600.00)
-Brand NEW Samco inlet pipe (red) 270.00
-Brand NEW Sard fuel pressure regulator 125.00
-USED Factory WRX wing BLUE 125.00
-Used 60mm HKS Electric Fuel pressure guage (Almost new) No damage anywhere.(Silver with red dial.) 140.00
I also have other EJ20 WRX parts.
Thank U.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Used WRX EJ20 Intake manifold. (it comes with manifold, injectors, rails, throttle body, etc.) 350.00 (SOLD to Section 8 - Payment recieved)
-Used WRX EJ20 exhaust manifold. 125.00 (SOLD)
-Used PDE up pipe (SOLD) (SOLD TO KINGSKY).
-52mm Greddy Fuel pressure guage (SOLD to Kingsky)
-Used PDE down pipe (SOLD)
-Brand NEW Denso Sard Supra fuel pump 255 lph 200.00 (SOLD TO ASH) (payment recieved.)
All engine parts are off of 2002 WRX with 26000 miles on it unless it is marked new or other wise.
If U have any question or needing to see the photos, Please PM me....
-Used WRX EJ20 short block. (Number 3 piston is no more, but everything else is in great condition, great build up project.) was 350.00 (NOW 200.00)+shipping
-Used WRX Turbo was 200.00 (NOW 125.00)
-Used WRX ECU (275.00) shipped
-Brand NEW in box, EJ20 + EJ22 (same thing) Pauter billet forged rods. Paid 750.00 (selling for 600.00)
-Brand NEW Samco inlet pipe (red) 270.00
-Brand NEW Sard fuel pressure regulator 125.00
-USED Factory WRX wing BLUE 125.00
-Used 60mm HKS Electric Fuel pressure guage (Almost new) No damage anywhere.(Silver with red dial.) 140.00
I also have other EJ20 WRX parts.
Thank U.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Used WRX EJ20 Intake manifold. (it comes with manifold, injectors, rails, throttle body, etc.) 350.00 (SOLD to Section 8 - Payment recieved)
-Used WRX EJ20 exhaust manifold. 125.00 (SOLD)
-Used PDE up pipe (SOLD) (SOLD TO KINGSKY).
-52mm Greddy Fuel pressure guage (SOLD to Kingsky)
-Used PDE down pipe (SOLD)
-Brand NEW Denso Sard Supra fuel pump 255 lph 200.00 (SOLD TO ASH) (payment recieved.)
Last edited by 2.5WRCWRX; 06-27-2003 at 02:01 AM.
#7
Guest
Posts: n/a
bump
bump
Thanks for the kind work Kinsky (aka Randy)
Thanks section 8 for your purchase...
Thanks for the kind work Kinsky (aka Randy)
Thanks section 8 for your purchase...
#8
Guest
Posts: n/a
hey
Regarding the ej20...
This is the deal, I can make for everyone...
I still have the WRX ej20 short block...
It does need to be rebuilt...
This block would be good for someone that is starting a stupid fast ej20 project.
So botom line is U need to bore all the cylanders and put new pistons. and if U want hall *** power. Get some forged pistons and forge rods(which I have for sale.).
I am willing to sell the block for 300.00 + shipping.
and if U are intersted in pauter forged billet rods(it is new never used in original packaging.. I can give U a great price on both.
Pauter new cost 737 + tax but if U do buy my block and rods
I will sell the block to U at 275 + shipping and 636 for rods.
let me know.
This is the deal, I can make for everyone...
I still have the WRX ej20 short block...
It does need to be rebuilt...
This block would be good for someone that is starting a stupid fast ej20 project.
So botom line is U need to bore all the cylanders and put new pistons. and if U want hall *** power. Get some forged pistons and forge rods(which I have for sale.).
I am willing to sell the block for 300.00 + shipping.
and if U are intersted in pauter forged billet rods(it is new never used in original packaging.. I can give U a great price on both.
Pauter new cost 737 + tax but if U do buy my block and rods
I will sell the block to U at 275 + shipping and 636 for rods.
let me know.
#11
@Stoptech
iTrader: (5)
Join Date: Nov 2002
Location: San Francisco, CA
Posts: 2,416
Car Info: 2002 WRX Wagon
your pm box is full. empty the sent items folder too.
let me know when you've done that.
it might also help to tell people what region of the country you're from.
i'm interested in the motor and tranny mounts.
let me know when you've done that.
it might also help to tell people what region of the country you're from.
i'm interested in the motor and tranny mounts.
#12
Guest
Posts: n/a
Hey
PM has been cleared (That is stange there was only 5 in the PM box)
I am in southern cali................
I am in southern cali................
Last edited by 2.5WRCWRX; 05-24-2003 at 06:35 PM.
#13
@Stoptech
iTrader: (5)
Join Date: Nov 2002
Location: San Francisco, CA
Posts: 2,416
Car Info: 2002 WRX Wagon
Re: Hey
Originally posted by 2.5WRCWRX
PM has been cleared (That is stange there was only 5 in the PM box)
I am in southern cali................
PM has been cleared (That is stange there was only 5 in the PM box)
I am in southern cali................
your pm box is full. empty the sent items folder too.
#14
Guest
Posts: n/a
Hello
Hey
PM should work now...
Steppin I PM U... )Your PM is full as well..
PM should work now...
Steppin I PM U... )Your PM is full as well..
Last edited by 2.5WRCWRX; 05-24-2003 at 06:45 PM.