Endlink Bushings
03-18-2003, 04:48 PM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ohio
Posts: 264
Car Info: DOHC Impreza RS soon to be TN
Endlink Bushings
Complete set for front and rear. Good for that stealth look if you autocross and don't want to get the actual hardened links, but just new bushings for a little better feel. WIll take $45 shipped for both sets.
-Kevin
-Kevin
03-18-2003, 05:06 PM
#2
Guest
Posts: n/a
What car are these for? Are the fronts for the wagon since I know that the GD sedan front endlinks don't have bushings (I just replaced one of them so I know this
)?
Dale
)?Dale
03-18-2003, 05:25 PM
#3
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ohio
Posts: 264
Car Info: DOHC Impreza RS soon to be TN
I am pretty sure they are for both. If they don't have bushings, what is holding them to the swaybar?
03-18-2003, 07:21 PM
#4
Guest
Posts: n/a
The fronts on the sedan are rod-end links with a pillow ball joint(?) at each end and a stud that sticks out through the bar and lower arm bracket. The rear is a u-shaped resin link with bushings at either end that you put bolts through to attach to the swaybar. I think that the wagon has straight front links with bushings and bolts that go through and attach them to bar and bracket. (I've never looked at a wagon but I am 100% certain about the fronts on the WRX since I just had to cut one off after a bodyshop had striped the threads on the stud on mine)
Dale
Dale
03-18-2003, 07:29 PM
#5
Guest
Posts: n/a
The fronts on the sedan are rod-end links with a pillow ball joint(?) at each end and a stud that sticks out through the bar and lower arm bracket. The rear is a u-shaped resin link with bushings at either end that you put bolts through to attach to the swaybar. I think that the wagon has straight front links with bushings and bolts that go through and attach them to bar and bracket. (I've never looked at a wagon but I am 100% certain about the fronts on the WRX since I just had to cut one off after a bodyshop had striped the threads on the stud on mine)
Dale
Dale
03-18-2003, 08:57 PM
#6
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ohio
Posts: 264
Car Info: DOHC Impreza RS soon to be TN
Then these are for the GC Chasis then. Thanks ICE!
03-19-2003, 01:25 PM
#7
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ohio
Posts: 264
Car Info: DOHC Impreza RS soon to be TN
bump!
03-20-2003, 07:38 AM
#8
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ohio
Posts: 264
Car Info: DOHC Impreza RS soon to be TN
bump!
Thread
Thread Starter
Forum
Replies
Last Post
wrx 03i
Wanted
2
07-06-2012 08:07 PM
2point5AWD
Suspension, Handling, and Brakes
4
01-23-2005 09:41 PM