Wtt 04 Wrx Headlights For 05
#1
VIP Member
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: fairfield/foster city
Posts: 3,274
Car Info: e39
Wtt 04 Wrx Headlights For 05
like the title says I have stock 04 wrx headlights and want to swap it for 05 headlights. Located in fairfield but work in millbrae so can swap whenever.
Raymund
Raymund
#5
Registered User
iTrader: (1)
Join Date: May 2005
Location: My lugnuts require more torque then your Honda makes
Posts: 1,404
Car Info: 05 WRX
Originally Posted by dizmfker
you know that the 04 headlights dont sit perfectly flush at the bottom on 05's.. so i would think it would be the same vice versa
Here is a before pic with 04 STI Headlights
After with 05 Headlights
Last edited by gqchynaboy; 03-31-2006 at 10:19 PM.
#14
Registered User
iTrader: (9)
Join Date: May 2005
Location: San Jose
Posts: 5,011
Car Info: 2006 evo IX
Originally Posted by tamashi523
like the title says I have stock 04 wrx headlights and want to swap it for 05 headlights. Located in fairfield but work in millbrae so can swap whenever.
Raymund
Raymund
Remove lights
Remove all screws around the edge of the light
place light in oven at 250 for 10-15 minutes
use screw driver to pry housing apart
Pull out the refelctor surround, sand it, clean it, primer it, and spray it with gunmetal
Lots of DIY write ups on scooby-mods and ****-****
#15
VIP Member
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: fairfield/foster city
Posts: 3,274
Car Info: e39
Originally Posted by ucbsti
Its simple enough paint the reflector surrounds gunmetal like the 05 housing. I suggest using duplicolor gunmetal wheel paint, and while you are at it you can take out the reflectors. Clearing the lights is very easy
Remove lights
Remove all screws around the edge of the light
place light in oven at 250 for 10-15 minutes
use screw driver to pry housing apart
Pull out the refelctor surround, sand it, clean it, primer it, and spray it with gunmetal
Lots of DIY write ups on scooby-mods and ****-****
Remove lights
Remove all screws around the edge of the light
place light in oven at 250 for 10-15 minutes
use screw driver to pry housing apart
Pull out the refelctor surround, sand it, clean it, primer it, and spray it with gunmetal
Lots of DIY write ups on scooby-mods and ****-****