WTB: Rims and r180 and f/r axles
#1
WTB: Rims and r180 and f/r axles
Looking for some rims that i can turn into my everyday/take to the snow rims. they need to be atleast a 17 and need to be 5x100. not looking to spend an arm and a leg, but let me know what you have.
also, looking at upgrading my rear diff and axles as right now i am running an crawford block and sti tranny with a 3.9 ring and pinion in a stock wrx housing. would like to upgrade the axels and rear diff for peace of mind.(is this all i would need to make the swap work or would i need knuckles or a different ring and pinion to work?)
oh ya, also looking for some gauges. boost, egt and oil pressure. i have an 02 wrx so i would like them to match the guages already in there. i have a 52mm(?) autometer guage bezel already so no need for mounting. just need gauges.
thanks and let me know what you have!
thanks for the help!!!
also, looking at upgrading my rear diff and axles as right now i am running an crawford block and sti tranny with a 3.9 ring and pinion in a stock wrx housing. would like to upgrade the axels and rear diff for peace of mind.(is this all i would need to make the swap work or would i need knuckles or a different ring and pinion to work?)
oh ya, also looking for some gauges. boost, egt and oil pressure. i have an 02 wrx so i would like them to match the guages already in there. i have a 52mm(?) autometer guage bezel already so no need for mounting. just need gauges.
thanks and let me know what you have!
thanks for the help!!!
Last edited by surfer5567; 12-16-2008 at 08:42 AM.
#5
#7
Former Sponsor
iTrader: (14)
Join Date: Sep 2006
Location: Hayward, CA
Posts: 3,246
Car Info: WRX, EVO, MSP3
If you upgrade to the R180 you will also need to change the yoke to accept your current driveshaft. From there you need to change rear axles which would also mean you need to switch the rear knuckles/hubs which then means you would need STI brembo's or something that bolts up similar.
It's a little bit of a process.
Mike
It's a little bit of a process.
Mike
#9
If you upgrade to the R180 you will also need to change the yoke to accept your current driveshaft. From there you need to change rear axles which would also mean you need to switch the rear knuckles/hubs which then means you would need STI brembo's or something that bolts up similar.
It's a little bit of a process.
Mike
It's a little bit of a process.
Mike
thanks for all the help guys!!
#10
Thread
Thread Starter
Forum
Replies
Last Post
aboothman
NorCal Classifieds
11
10-18-2011 02:22 PM
kaneda3
Subaru OEM Parts For Sale
3
08-10-2005 11:02 AM