SMC Alcohol Injection in Stock & Ready to Ship !
#1
SMC Alcohol Injection in Stock & Ready to Ship !
Hey all,
We've got a new product that we're really excited about: SMC Alcohol Injection. It's got a ton of potential but it's still a very cost effective mod. Designed to be a hassle free upgrade, this package includes everything you need to get alcohol injection running properly on your car. Although many people are “scared” of alcohol injection, if utilized properly, it is perfectly safe while also being one of the best bang for the buck power adders available for a boosted car. Alcohol injection works by injecting a fine mist of alcohol into the intake stream. This does two important things:
1) Alcohol Injection lowers the temperature of the intake charge to create a denser (and thus greater) air mass.
2) Alcohol Injection raises the effective octane of your fuel which works towards avoiding detonation (the sworn enemy of engines).
These two factors are particularly beneficial on turbocharged cars because the effectiveness of turbocharging is dependent on having a dense and cool intake charge while also avoiding detonation. Boosted engines are particularly succeptable to detonation because they can see such high pressures and temperatures. By increasing the effective octane of your fuel, it allows you to run higher boost and add more timing advance. It is not uncommon to see HP gains as high as 20-30% with these changes, regardless of modifications. Additionally, two added bonuses of alky injection are that it also cleans your engine and will work with pump gas.
*Dyno graph taken from 2.35L running GT35R w/ supporting mods.
The SMC Alcohol Injection System is unique, reliable, and safe in several regards. Designed from the ground up specifically for the Subaru WRX and STi, this system includes a 1 gallon washer fluid tank that serves as a reservoir. This makes for a very simple and stealthy install. A small auxilliary washer tank/pump that mounts in front of the battery is also included so that you can still clean your windshield. Another unique feature of this kit is the Progressive Controller. An extremely small unit that can be fitted nearly anywhere (it measures only 2.75" wide x .9" high x 4.6" deep), this microprocessor based device will automatically increase alcohol spray pressure as boost rises. This system runs on denatured alcohol that can be bought nearly anywhere.
As is wise when running high boost levels, tools critical to tuning are highly recommened to be used in conjunction with this kit. A wide-band 02 controller, knock link, and tuning are suggested.
- Increase effective octane of fuel
- Drastically decrease temperature of intake charge
- Allows higher boost and more timing advance
- Expect 20-30% HP increases
- Stealth installation
SMC Alcohol Injection - $499 Shipped!
Please contact us for ordering information!
Thanks,
Preston
Phone: (510) 783-5300
We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXX
sales rep: Preston/Geoff
Price including shipping: $XXXX
Shipping address.
We've got a new product that we're really excited about: SMC Alcohol Injection. It's got a ton of potential but it's still a very cost effective mod. Designed to be a hassle free upgrade, this package includes everything you need to get alcohol injection running properly on your car. Although many people are “scared” of alcohol injection, if utilized properly, it is perfectly safe while also being one of the best bang for the buck power adders available for a boosted car. Alcohol injection works by injecting a fine mist of alcohol into the intake stream. This does two important things:
1) Alcohol Injection lowers the temperature of the intake charge to create a denser (and thus greater) air mass.
2) Alcohol Injection raises the effective octane of your fuel which works towards avoiding detonation (the sworn enemy of engines).
These two factors are particularly beneficial on turbocharged cars because the effectiveness of turbocharging is dependent on having a dense and cool intake charge while also avoiding detonation. Boosted engines are particularly succeptable to detonation because they can see such high pressures and temperatures. By increasing the effective octane of your fuel, it allows you to run higher boost and add more timing advance. It is not uncommon to see HP gains as high as 20-30% with these changes, regardless of modifications. Additionally, two added bonuses of alky injection are that it also cleans your engine and will work with pump gas.
*Dyno graph taken from 2.35L running GT35R w/ supporting mods.
The SMC Alcohol Injection System is unique, reliable, and safe in several regards. Designed from the ground up specifically for the Subaru WRX and STi, this system includes a 1 gallon washer fluid tank that serves as a reservoir. This makes for a very simple and stealthy install. A small auxilliary washer tank/pump that mounts in front of the battery is also included so that you can still clean your windshield. Another unique feature of this kit is the Progressive Controller. An extremely small unit that can be fitted nearly anywhere (it measures only 2.75" wide x .9" high x 4.6" deep), this microprocessor based device will automatically increase alcohol spray pressure as boost rises. This system runs on denatured alcohol that can be bought nearly anywhere.
As is wise when running high boost levels, tools critical to tuning are highly recommened to be used in conjunction with this kit. A wide-band 02 controller, knock link, and tuning are suggested.
- Increase effective octane of fuel
- Drastically decrease temperature of intake charge
- Allows higher boost and more timing advance
- Expect 20-30% HP increases
- Stealth installation
SMC Alcohol Injection - $499 Shipped!
Please contact us for ordering information!
Thanks,
Preston
Phone: (510) 783-5300
We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXX
sales rep: Preston/Geoff
Price including shipping: $XXXX
Shipping address.
#9
darmom - A retune would be in order and it is not for sure but to my understanding it will ruin CATs.
wrxguy - PM recieved and replied.
mcdrama - Haha, it is ok.
Thanks,
Greg
wrxguy - PM recieved and replied.
mcdrama - Haha, it is ok.
Thanks,
Greg
Thread
Thread Starter
Forum
Replies
Last Post
STiw/Toys
Used Aftermarket Car Parts For Sale
3
05-19-2008 09:08 AM
tarak
Engine/Power - EJ20T (pre-2006 WRX and JDM)
5
04-23-2004 09:02 PM