Radio/Boost gauge wiring guru help needed $
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Feb 2010
Location: The Yay Area!
Posts: 334
Car Info: 02 WRX
Radio/Boost gauge wiring guru help needed $
Hi everyone, I am here again to ask for help. I recently try to tap into my radio wiring harness to install my electric boost gauge(tired of mechanical) and lets just say I did not do such a good job.
Here is what I need help with:
*3 wires connected to the radio has been splice/cut and needs to be replaced.
*Need help wire the electric boost gauge. Hose for the boost gauge to the bypass has been cut already.
Let me know if you can help, prefer someone in Bay area near Alameda/Oakland so itll be easier but will travel if help is offered. This is a simple task for whoever has experience with wiring harness and such.
Will pay $30. I am broke I know. let me know if you would like to help. Thanks!
Here is what I need help with:
*3 wires connected to the radio has been splice/cut and needs to be replaced.
*Need help wire the electric boost gauge. Hose for the boost gauge to the bypass has been cut already.
Let me know if you can help, prefer someone in Bay area near Alameda/Oakland so itll be easier but will travel if help is offered. This is a simple task for whoever has experience with wiring harness and such.
Will pay $30. I am broke I know. let me know if you would like to help. Thanks!
#2
Registered User
iTrader: (12)
Join Date: Apr 2008
Location: Bay Area
Posts: 2,099
Car Info: RWD Camry
Which wires do you need to hook up exactly? I'm assuming this is a prosport gauge. If not, the colors should be similar
-black=ground
-red=constant 12v
-white=white illumination
-green/orange= green/orange illuminationon
-ground the black to the metal brace below the steering column
-splice the red wire to the green ignition wire inside the steering column
-depending on what color you want:
white day/green night= splice white w/ red wire and green to headlight wire inside steering column
-green day/ white night= opposite of above
-white all day=splice white to red wire, tape off green wire
-green all day= opposite of above
-black=ground
-red=constant 12v
-white=white illumination
-green/orange= green/orange illuminationon
-ground the black to the metal brace below the steering column
-splice the red wire to the green ignition wire inside the steering column
-depending on what color you want:
white day/green night= splice white w/ red wire and green to headlight wire inside steering column
-green day/ white night= opposite of above
-white all day=splice white to red wire, tape off green wire
-green all day= opposite of above
#4
Registered User
Thread Starter
iTrader: (3)
Join Date: Feb 2010
Location: The Yay Area!
Posts: 334
Car Info: 02 WRX
Hey Pactin, I really appreciate the info I did follow that guide but in the process I remembered I could not find a certain wire so I splice the wrong wire and now im just done messing around since my wires are all cut up and my radio makes this static noise when Im on bump roads so I just want someone with knowledge like yourself to fix this minor error.
Thread
Thread Starter
Forum
Replies
Last Post
cdawg
NorCal Classifieds
0
01-04-2008 03:44 PM
mikkellucci
Used Aftermarket Car Parts For Sale
0
10-18-2006 07:07 AM
mattr762
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
04-18-2003 09:12 AM