March Madness B L O W O U T Sale! !
03-01-2005, 03:30 PM
#1
March Madness B L O W O U T Sale! !
Tein BASIC - 02+ WRX
$899 shipped
*1-way Height Adjustment
02+ WRX/STi: (Front: -83~-50mm; Rear: -44~-21mm)
Recommended: (Front: -63mm; Rear: -29mm)
*Includes main springs and helper springs
02+ WRX/STi: (Front: 5kg, 280 lbs; Rear: 5kg, 280 lbs)
*WRX/STi kit does not include upper mounts
Tein FLEX - 05 STi
$1585 shipped
Tein FLEX - 02+ WRX
$1585 shipped
*2-way Height Adjustment
02+ WRX/STi: (Front: -75~-15mm; Rear: -55~5mm)
Recommended: (Front: -50mm; Rear: -35mm)
*Compatible with Tein's EDFC damping controller
*16-level damping adjustment
*Spring Rates: 02+ WRX/STi: (Front: 8kg, 447 lbs; Rear: 7kg, 391 lbs)
*Includes pillowball upper mounts
Barely used USDM STi Intake Manifold $150 shipped ! Qty 2
We have not tested these on WRXs so we're not 100% sure regarding fitment.
GReddy V-SPL FMIC - 02+ WRX $825 shipped !
Apexi AVC-R $449 shipped !
The AVC-R allows flexible control over virtually every aspect of boost control and adds new innovative functions such as injector pulse monitoring and gear specific boost control. Some key functions include: RPM-based boost and solenoid duty cycle control, scramble boost, self learning mode, 2D ghost map trace mode, analog display mode, real time replay and peak hold data modes. The AVC-R utilizes an ultra-fast microprocessor and a high quality solenoid valve to control boost. The result is ultra-fast response and accurate, stable boost control.
APexi EL - 60mm Boost Mech - White $110 shipped !
Hallman RX Manual Boost Controller
$109 shipped ! Black available
Axxis Ultimate Pads - Front Pair - 2002 WRX
$49 shipped !
Axxis Ultimate Pads - Rear Pair - 2002 WRX
$39 shipped !
Front & Rear for $75 shipped !
Goodridge Stainless Lines - Front+Rear - 02+ WRX
$129 shipped !
Helix Oil Catch Can - Universal
$75 shipped !
The Helix Catch Can is designed to trap oil moisture and blow-by caused by normal engine operation, especially in turbo charged vehicles. On your factory vehicle, because of emissions regulations, the waste oil and sludge is generally re-routed back into the intake stream. This debris will tend to accumulate inside the intake tract, intercooler, turbocharger, as well as be ingested into the engine during normal combusion process. Needless to say, this sludge and blow-by will hurt the performance of your vehicle. The Helix Catch Can eliminates this problem by trapping such debris and insuring optimal horsepower and longevity of you vehicle.
Features: Machined and polished aluminum tank, Clear braided hoses with hose clamps and adapter, visual debris level indicator, mounts vertically or horizontally.
Cusco Engine/Tranny Mount Combo - 02+ WRX
$250 shipped
Cusco Camber Plates (Rear Pair) - 02+ WRX
$219 shipped
Cusco 21mm Front Sway Bar- 02+ WRX
$155 shipped !
AeroSync Reverse Hood Scoop - 04+ WRX/STI $159 shipped
Aerosync 04+ Vented Fiberglass Hood
It has nice vents for cooling and is pretty light.
$375 + shipping
Helix High-Flow Catted Downpipe (200 cell) 02+ WRX / STI
$399 shipped
Helix (Stainless) Catless Downpipe - US Spec - 02+ WRX/STI
$285 shipped
Helix Catback - 02+ WRX
$499 shipped
Helix TMIC
$599 shipped
The Helix Top-Mount-Intercooler for the 2002-2005 Impreza WRX features a massive 480mm x 200mm x 100mm (19” x 8” x 4”) bar and plate core designed exclusively for larger-than-stock-turbo WRX’s. The massive bar and plate core allows efficient cooling of the intake charge with minimal pressure drop. 25 + degree (F) intake charge temperature reductions are realized over the stock TMIC – helping to both increase power and reduce risk of detonation.* Included is a cast-aluminum Y-pipe, silicon hose, and the cast end-tanks are CNC machined to ensure optimal flow characteristics. Dyno-testing has yielded over 15whp gains with even greater performance gains in real world conditions.
Thanks
Preston
Gruppe-S
We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXXX
sales rep: Preston
Price including shipping: $XXXX
Shipping address.
$899 shipped
*1-way Height Adjustment
02+ WRX/STi: (Front: -83~-50mm; Rear: -44~-21mm)
Recommended: (Front: -63mm; Rear: -29mm)
*Includes main springs and helper springs
02+ WRX/STi: (Front: 5kg, 280 lbs; Rear: 5kg, 280 lbs)
*WRX/STi kit does not include upper mounts
Tein FLEX - 05 STi
$1585 shipped
Tein FLEX - 02+ WRX
$1585 shipped
*2-way Height Adjustment
02+ WRX/STi: (Front: -75~-15mm; Rear: -55~5mm)
Recommended: (Front: -50mm; Rear: -35mm)
*Compatible with Tein's EDFC damping controller
*16-level damping adjustment
*Spring Rates: 02+ WRX/STi: (Front: 8kg, 447 lbs; Rear: 7kg, 391 lbs)
*Includes pillowball upper mounts
Barely used USDM STi Intake Manifold $150 shipped ! Qty 2
We have not tested these on WRXs so we're not 100% sure regarding fitment.
GReddy V-SPL FMIC - 02+ WRX $825 shipped !
Apexi AVC-R $449 shipped !
The AVC-R allows flexible control over virtually every aspect of boost control and adds new innovative functions such as injector pulse monitoring and gear specific boost control. Some key functions include: RPM-based boost and solenoid duty cycle control, scramble boost, self learning mode, 2D ghost map trace mode, analog display mode, real time replay and peak hold data modes. The AVC-R utilizes an ultra-fast microprocessor and a high quality solenoid valve to control boost. The result is ultra-fast response and accurate, stable boost control.
APexi EL - 60mm Boost Mech - White $110 shipped !
Hallman RX Manual Boost Controller
$109 shipped ! Black available
Axxis Ultimate Pads - Front Pair - 2002 WRX
$49 shipped !
Axxis Ultimate Pads - Rear Pair - 2002 WRX
$39 shipped !
Front & Rear for $75 shipped !
Goodridge Stainless Lines - Front+Rear - 02+ WRX
$129 shipped !
Helix Oil Catch Can - Universal
$75 shipped !
The Helix Catch Can is designed to trap oil moisture and blow-by caused by normal engine operation, especially in turbo charged vehicles. On your factory vehicle, because of emissions regulations, the waste oil and sludge is generally re-routed back into the intake stream. This debris will tend to accumulate inside the intake tract, intercooler, turbocharger, as well as be ingested into the engine during normal combusion process. Needless to say, this sludge and blow-by will hurt the performance of your vehicle. The Helix Catch Can eliminates this problem by trapping such debris and insuring optimal horsepower and longevity of you vehicle.
Features: Machined and polished aluminum tank, Clear braided hoses with hose clamps and adapter, visual debris level indicator, mounts vertically or horizontally.
Cusco Engine/Tranny Mount Combo - 02+ WRX
$250 shipped
Cusco Camber Plates (Rear Pair) - 02+ WRX
$219 shipped
Cusco 21mm Front Sway Bar- 02+ WRX
$155 shipped !
AeroSync Reverse Hood Scoop - 04+ WRX/STI $159 shipped
Aerosync 04+ Vented Fiberglass Hood
It has nice vents for cooling and is pretty light.
$375 + shipping
Helix High-Flow Catted Downpipe (200 cell) 02+ WRX / STI
$399 shipped
Helix (Stainless) Catless Downpipe - US Spec - 02+ WRX/STI
$285 shipped
Helix Catback - 02+ WRX
$499 shipped
Helix TMIC
$599 shipped
The Helix Top-Mount-Intercooler for the 2002-2005 Impreza WRX features a massive 480mm x 200mm x 100mm (19” x 8” x 4”) bar and plate core designed exclusively for larger-than-stock-turbo WRX’s. The massive bar and plate core allows efficient cooling of the intake charge with minimal pressure drop. 25 + degree (F) intake charge temperature reductions are realized over the stock TMIC – helping to both increase power and reduce risk of detonation.* Included is a cast-aluminum Y-pipe, silicon hose, and the cast end-tanks are CNC machined to ensure optimal flow characteristics. Dyno-testing has yielded over 15whp gains with even greater performance gains in real world conditions.
Thanks
Preston
Gruppe-S
We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXXX
sales rep: Preston
Price including shipping: $XXXX
Shipping address.
Last edited by gruppe-s; 03-03-2005 at 01:19 PM.
03-01-2005, 08:59 PM
#2
VIP Member
iTrader: (23)
Join Date: Sep 2003
Location: Fremont
Posts: 4,968
Car Info: 1999 2.5RS / 2004 Forester X
Not that I care but.... shouldn't these Gruppe-S posts be in Vendor classifieds?
https://www.i-club.com/forums/sale-vendors-42/
https://www.i-club.com/forums/sale-vendors-42/
03-01-2005, 10:40 PM
#5
Registered User
Join Date: Jun 2003
Location: Ramstein Germany
Posts: 343
Car Info: 2007 STI
will that intake manifold work on a wrx????
Thread
Thread Starter
Forum
Replies
Last Post
Speed Element
Engine and Drivetrain
1
03-31-2010 02:20 PM
Speed Element
NorCal Classifieds
2
03-15-2010 11:53 AM