FS Primitive Fabrication Forester Skid plates
01-01-2010, 12:07 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Sep 2009
Location: Sacramento
Posts: 136
Car Info: 2005 Forester 2.5X
FS Primitive Fabrication Forester Skid plates
Lightly used, scratched but no dents.
For the N/A forester, will not fit turbo models. Should fit 2003-2008 foresters, may fit older models as well.
Also might fit the 2.5rs but I'm not sure.
Comes with all hardware and some spacers that I used for more engine clearance. I did cut a hole for the oil drain plug.
$200 for both
or
$125 front
$100 rear
They are currently installed on my car, I'll need to pick up some factory bolts for the rear diff before the rear plate comes off. If you have a forester we could just swap the rear over in the parking lot.
For the N/A forester, will not fit turbo models. Should fit 2003-2008 foresters, may fit older models as well.
Also might fit the 2.5rs but I'm not sure.
Comes with all hardware and some spacers that I used for more engine clearance. I did cut a hole for the oil drain plug.
$200 for both
or
$125 front
$100 rear
They are currently installed on my car, I'll need to pick up some factory bolts for the rear diff before the rear plate comes off. If you have a forester we could just swap the rear over in the parking lot.
Thread
Thread Starter
Forum
Replies
Last Post
cleofis
NorCal Classifieds
3
05-20-2012 11:04 PM
baco
NorCal Classifieds
2
01-02-2010 10:57 AM
