fs: oem subaru rain visors/guard - damaged
#1
Registered User
Thread Starter
iTrader: (14)
Join Date: Mar 2004
Location: east bay, ca
Posts: 652
Car Info: 04 sti / 02 wrx / 01 cbr600 f4i
fs: oem subaru rain visors/guard - damaged
so the previous owner had the oem rain visors installed on the car.
i wanted to put yakima q-tower rack on, so i had to remove these. long story short, the adhesive on the driver's side was way too strong and i snapped the piece in two "cleanly" broken pieces. i took pictures that will show that the piece could be bonded back together somehow and the damage would be barely visible...the two pieces fit exactly.
the passenger side visor was removed with no problems.
i am including all hardware/clips except you will need adhesive to install. i just wanted to gauge interest because i'd hate to see a piece like this go to waste. i can't use it because of the rack, so i'm taking offers...
thanks,
marc
i wanted to put yakima q-tower rack on, so i had to remove these. long story short, the adhesive on the driver's side was way too strong and i snapped the piece in two "cleanly" broken pieces. i took pictures that will show that the piece could be bonded back together somehow and the damage would be barely visible...the two pieces fit exactly.
the passenger side visor was removed with no problems.
i am including all hardware/clips except you will need adhesive to install. i just wanted to gauge interest because i'd hate to see a piece like this go to waste. i can't use it because of the rack, so i'm taking offers...
thanks,
marc
#5
Registered User
iTrader: (41)
Join Date: Sep 2005
Location: SJSU/Milpitas
Posts: 1,115
Car Info: 99 AW ej205 Coupe // 06 SGM Wagon
I don't mean to ruin your sale, but if you want to keep the rain visors you can try this out:
http://forums.nasioc.com/forums/showthread.php?t=882744
I actually just finished doing this mod and love how it sits on top of the roof and is mounted by the rain gutters. It feels sturdier mounted with this method instead of the way Yakima suggests. I believe the newer hatches utilize the mounting point which is used. The only real problem is finding some cheap Q7 clips. Some say you can find a set of 4 for $20, otherwise if you go on ebay, they're $35 for a pair...
Just wanted to give you another option, but good luck with the sale. Free bump
http://forums.nasioc.com/forums/showthread.php?t=882744
I actually just finished doing this mod and love how it sits on top of the roof and is mounted by the rain gutters. It feels sturdier mounted with this method instead of the way Yakima suggests. I believe the newer hatches utilize the mounting point which is used. The only real problem is finding some cheap Q7 clips. Some say you can find a set of 4 for $20, otherwise if you go on ebay, they're $35 for a pair...
Just wanted to give you another option, but good luck with the sale. Free bump
#8
Registered User
iTrader: (17)
Join Date: Apr 2007
Location: Bay Area
Posts: 396
Car Info: 2007 Impreza WRX Limited Bugeye Conversion
Just a note for anyone interested in buying these. I bought a set of crack rain guards and used a high quality superglue to put them back together. You can hardly tell they were cracked unless you are like a foot away.
bump for you!
bump for you!
Thread
Thread Starter
Forum
Replies
Last Post
NemoSuby
NorCal Classifieds
16
01-15-2012 03:48 PM
EiGhT08ImPrEzA
Hawaii Classifieds
7
12-07-2010 03:52 AM