Housings are sold, see new thread for HID parts!

You will get

-2 05 WRX headlights (gunmetal surrounds)
-2 OEM STi ballasts (with H4 wiring harness for plug and play into WRX)
-2 D2S OEM Phillips bulbs
-A ton of spare wires/end caps/abs plastic sheet/screws/sealing end caps/all other bubls for lights

Notes
-The lights are still dissassembled. You can plaint the housings any color you want or add/remove the orange reflectors
-The reflectors on the low-beam side have been cut/modified to fit LARGE 3" Bi-xenon projectors
-The housings have been cut a tad in the rear to make room for the bi-xenon solenoids

I never fully mounted the projectors and sold my STi before I finished the project. I could finish the retrofit, but am not comfortable doing it without a car to install them on to level/align before I reseal them. One reflector was damaged, but I completely fixed it with lots of epoxy and painted over it. Once everything is together its not noticable at all (epoxy on the rear inside face)

 

you should do it and sell em id be scared of screwin something up

 

Thats the thing, I can mount the projectors, but without a car to put the lights on, its hard to tell if they are properly aligned. I dont want to seal the lights up without the projectors being properly aligned (although you can still use the adjustment screws for up/down and left/right)

Only work that needs to be down is

1). Mount projectors (I can show whoever buys them how I was going to do it)
2) Reseal/assemble light
3) Install

 

will u work on jdm bugeye headlights?

 

that would be easier than the 04-05 headlights, ive put some rs2 projectors into mine.

-jon

 

Yeah, since they are already projectors, mounting them is a bit easier, the 04-05 lights are sort of shallow, so projector length makes fitment tight

The output will also blow the JDM hids out of the water

 

Nice!!!!!

 

So if these were completed the same way u completed the ones on ur car they would look the same? Same size projectors? same shrouds?

 

these are the ones I intended to put in my car, I never finished the retrofit

 

I thought u were the one who had them on a white wrx with sti splitters ... Who was that? I'm pretty sure he used tsx projectors, it looked sweet.

 

yeah, that was gchynaboy, he had TSX projectors

These projectors have a sharper cutoff and are bi-xenon

 

Yep these are diffenitly sharper I would pick these up if I had money and sell my retrofit.

 

ah ok but if they were done the same as his they would look the same? same size lens? projector?

 

Same lens, different projector ( I took the lenses off a TSX projector and put them on this Koito Landrover one, so basically had to pay for both sets). I believe ggchynaboy used BMW shrounds and painted them black. So they will look slightly different

Here is what the custom shrounds I made look like. These are the actualy projectors as well

 

niceee .. i was so pick these up if i didn't have so many bills this month. aye .. here's a free bump