dan avoN7

iTrader: (11)

HKS Hipermax 2 Coilovers that are JDM valving with 7kg F and 5kg R Springs. They are in great condition. Coilovers make hardly any noise and are perfect for street/track. 30 way adjustable and has camber adjusting plates in the front.
Here are the spec pasted from HKS:

The Hipermax II coilover suspension kits have been engineered to be track ready suspension that is still "streetable". Dampening and rebound can be adjusted simultaneously in 30 different increments to deliver the desired shock compression and rebound stiffness. Ride height is adjusted by simply rotating the 60mm spring retainer perches around the chromed steel shock body. The dual interlocking spring retainer perches prevent spring movement and unwanted ride height changes.

Features:

1. Chromed Steel shock body assembly with precision-cut threads
2. Shortened cylinder body and piston stroke
3. Single tube structure with large free piston
4. Single tube structure with low-pressure nitrogen gas
5. Dual oil and gas chambers
6. Anodized aluminum Pillowball upper mounts
7. Anodized aluminum spring perches
8. Dual rate progressive coil springs
9. Fully rebuildable

Looking to get $1450 local for them and can help install them if you would like. Here are pics of the tophats (purple anodizing is perfect) and i will take pictures of the strut bodies tommoorw.

AzN121184

iTrader: (17)

nice.



what u getting next? bump

samowrx

iTrader: (4)

how many miles on these?

wagonrex

iTrader: (3)

How many miles and do you need different camber plates to fit them on a 03 wagon

killaho

iTrader: (29)

they should bolt up just fine as is.

dan avoN7

iTrader: (11)

The coilovers have about 12k on them and as rob said they should bolt up to a wagon just fine.

krzyxrevver12

iTrader: (3)

I'll give you a dollar more than whatever Zoeb offers you

SsTiNgEr77

iTrader: (4)

lol, dont think dpt wants $401 dollars, weak lowballing Black 02 WRX

Zoeb2s

iTrader: (38)

What do I look like....you?

bump for davon/dpt

wagonrex

iTrader: (3)

For the tein I know that the sedan coilovers will fit the wagon with some rear camber bolts.. would I need that for the HKs?

dan avoN7

iTrader: (11)

To be honest i am not sure. If that is the case the bolts are cheap, around $30. I'll make some calls and check for you though to make sure.

killaho

iTrader: (29)

teins actually "fit" without rear camber bolts. you just get a little neg camber.

dan avoN7

iTrader: (11)

price is now $1400. I need to sell these.

wagonrex

iTrader: (3)

did you get a chance to find out if they can fit the wagon without additional parts? You mentioned that you can install them, so do you own a shop or something?