Ok,
So, the time has come for me to dump what I have been hoarding and downsize.

I have accumulated a MASSIVE amount of parts over the years, and it is now time for me to dump it off.

ALL PARTS LOCATED IN SANTA CRUZ, ill ship most of this stuff if needed (buyer pays), or if you come over the hill Ill offer a beer while you are here. I do go to south bay occasionally but I am not looking to do 40 runs over the hill.

A couple rules,

• All prices are OBO within reason. Please dont offensive lowball, I will ignore you.
• Please check the first posts, I will keep them updated, and be adding more things as I find them.
• Ill get pics up as soon as I can, for now, if you are interested in something PM me and Ill get you a pic of that item asap.

Ok,
Lets get this party started, suby stuff first, I will list some of my other crap that I have that is either universal or non subie, never know.

• BC Cams - NON AVCS:
  2 sets, both with about 5k on them, 272 and 264’s good shape, $400 per set.
• Unamed UEL header:
  Worked well, ran it for a bit, switched to ELH, dont remember where I got it. $100
• RCE T2 coils 02-07 WRX or 04 STI etc:
  Has the rear spring setup from the T3’s , 1 rear has a slight leak so it should be serviced. Before I send it off to do that and then list them for more, grab em now - $1100.00
• Eagle Rods:
  Used for 2k ish, good shape, Ill leave the unused (but torqued ) acl bearings in them. $300.00
• Early STI Crank:
  Good condition came from a block that was stripped just after purchase for forged / stroked internals. Not coated. $250.00
• EJ257 block:
  Core block, needs rebuild, had a water pump failure resulting in a seize up. Has crank/rods/pistons, unsure on condition. - $380.00
• GT2871R:
  ~2k miles, was on a 22RE turbo crawler project, didn’t stay on long as I sold the project as soon as it was done sans turbo upgrade. Standard config (IE not Subaru stock location) IWG. - $900.00
• AIM Sport MXL Digi Logger Dash:
  Comes w a slew of additional sensors, you can also get a cable from them to run straight from your DLC to the dash and pickup everything the ECU is outputting, choose what you want on the dash and set limits, alarms, shift lights etc. - $1000.00
• AEM 1 Gal Meth Inj:
  Aem 1 Gal meth setup, used for a drift project for approx 1k miles, sold the chassis and kept the drivetrain for a datsun, subsequently sold the datsun.. early version, you will need new tubing. - $300.00
• Primitive Legacy / Outback skid plate ( BG ):
  I didn’t get the chance to put this on before some stupid !#$ folded my car in half, brand new. $200.00
• RFRB Legacy wagon wing ( BG ):
  Silver, good shape, RARE, I paid a lot for this . - $150.00
• Grimspeed EWG up pipe w EWG:
  Ceramic Coated, 38MM EWG - $400.00
• Enkei ES-Tarmacs:
  17x8.5 – White, I put these up w a heavy heart, but reality is I prob wont use them again.. $1200.00

Non Subaru Specific Stuff:

• Mitsu Evo
  Hafe stainless cast manifold w external wastegate provision for mitsu evo
  Matching 02 housing with provision for return of ewg gasses
  both never used and new - $250.00
• Brand new MSD 8977 igntion
  Has built in MAP sensor for ignition curve based on boost , programmable with msd's software so you can create a curve.
  good unit but never used it ( was going to put it on a 1000 HP twin turbo mopar project )
  MSRP on this thing is around 950 , street price is usually in the upper 500's this is a steal for this unit - $450.00
• remote mount water pump , brand new
  info from CSR on it
  The high torque electric pump motor provides a constant flow rate which eliminates over-heating problems caused by extensive engine operation at low rpm's. It can also flow Coolant throughout the system when the engine is not running for between round cool-downs with no moving belts or pulleys so you can safely inspect or service the engine. Flows 35+ gpm and is CNC machined from billet 6061-T6 aluminum. - $200
• Apex'i AVCR - very lightly used - $275.00
• Apex'i SAFC - Very lightly used - $150.00
  
• I also have a fleet of Innovate Motorsports datalogging tools, if you are interested PM me, I have more than I want to list out separate right now.
  

Thats what today's dig through the garage brought out, I will add more as I go.

 

Ok so far this morning:

• GT Spec Headers, these were coated at one point long ago, yes I also have the up-pipe - $375
• 16G , this has bad seals. Came on a prev vehicle I owned. Unknown MFR. - $200.00
• Cusco Hyper Single clutch for 6 speed, needs new disk, I will give you the old one w so you can get it rebuilt or buy a new one. - $450
• TR 05 center console conversion, all the bits you need short of some of the washers / hardware bs for the e-brake. This is covered in 3M matte carbon (not very well) - $275
• 02 WRX Built heads, opened up to work on a 2.5 bottom end and has the same CC as an STI comb chamber. Lightly ported, exh polished, combustion chambers polished. Has BC valves, Supertech valve springs, Ti retainers. downside: the cam caps were lost on these, I have some however they should be line bored to make sure they are in spec at a machine shop. -$800 (this is basically the cost of the hardware in them)
• 02 WRX heads - cores for rebuild - $300

 

reserved v2

 

Bump for a good guy with one of the sexiest radio/bedroom voices I've ever heard.

 

haha thanks buddy.

 

Somebody buy these wheels so I don't have to.

Bump for awesome stuff.

 

Sent a pm about the headers

 

PM's replied and dug through a little more this am. Will get to the attic next.