New Vendor to I-Club ---> SUBTLE SOLUTIONS
#1
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Huntington Beach, CA / Troy, MI
Posts: 169
Car Info: 07 Forester XT WRB
New Vendor to I-Club ---> SUBTLE SOLUTIONS
Well, it's now official!!
Subtle Solutions is now a Vendor here on the Forum.
Thanks to all who have stuck with us through the thick and thin. We greatly appreciate your support, patience, and understanding.
We look forward to working with you all and will continue to work hard to develop unique aftermarket products for the Subaru community!
Please keep an eye out for NEW products to hit the Forum in the upcoming weeks!
Subtle Solutions is now a Vendor here on the Forum.
Thanks to all who have stuck with us through the thick and thin. We greatly appreciate your support, patience, and understanding.
We look forward to working with you all and will continue to work hard to develop unique aftermarket products for the Subaru community!
Please keep an eye out for NEW products to hit the Forum in the upcoming weeks!
#6
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Huntington Beach, CA / Troy, MI
Posts: 169
Car Info: 07 Forester XT WRB
(02-07) WRX & STI - Chimney Duct w/ Heatshield
What is it?
Subtle Solutions - Chimney Duct w/ Turbo Heat Shield was designed to fit the Subaru Impreza (2002 - 2007) WRX & STI. While utilizing the stock intercooler mounting bracket and hole(s), this 304 Stainless Steel product helps eliminate heat soak on your intercooler by providing an outlet aka "chimney" for hot air to escape through your factory or aftermarket hoodscoop splitter vents. While driving, this product allows cooler air to travel through the chimney and push warmer air out of the engine bay and down towards the ground. We are very proud to say that all of our products are MADE IN USA!
#7
Registered User
iTrader: (17)
Join Date: Dec 2008
Location: vacaville CA
Posts: 2,158
Car Info: 2006 sti
by chance having a "new vendor sale"i saw the Ashtray Gauge Bezel and i REALLY like that.would you be able to color match the stock dash color?and when you say its shipped blank does that mean i have to cut the holes?i would want it with 1-52mm holes(aem wideband) and then maybe a custom small hole were i could mount a cig lighter for charging the cell phone.think that would work
#8
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Huntington Beach, CA / Troy, MI
Posts: 169
Car Info: 07 Forester XT WRB
Response to questions
by chance having a "new vendor sale"i saw the Ashtray Gauge Bezel and i REALLY like that.would you be able to color match the stock dash color?and when you say its shipped blank does that mean i have to cut the holes?i would want it with 1-52mm holes(aem wideband) and then maybe a custom small hole were i could mount a cig lighter for charging the cell phone.think that would work
The Gauge Bezel is sold in three different options (vary in price):
1. Blank Panel ($74.99)
2. (2) 52mm holes ($79.99)
3. (2) 60mm holes ($79.99)
Finish
All Ashtray Gauge Bezels are Brushed Aluminum and are not painted. This gives the customer the option to paint, plasti-dip, or anodize the panel on their own.
* We are a vendor on a few other Subaru forums and just ended a Pre-Order / Group Buy on these. To be fair to the other customers, we cannot offer these for less than what they paid. Thanks for your understanding.
#10
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Huntington Beach, CA / Troy, MI
Posts: 169
Car Info: 07 Forester XT WRB
Ha. No, we have a lot of things on our "to do" list right now. We also are developing products for the Mitsubishi community too.
I think we have a fair share of products to offer the Subaru community right now. However, we are always open for suggestions!
#11
Welcome to i-club! I look forward to seeing what suprises you have in store for us!
Gotta make your stickers in pink! :-P Ya know...since so many girls drive these cars...haha...more pink is always a good option *big wink*
Gotta make your stickers in pink! :-P Ya know...since so many girls drive these cars...haha...more pink is always a good option *big wink*
#12
#13
Registered User
iTrader: (2)
Join Date: Sep 2007
Location: Discovery Bay, CA
Posts: 1,569
Car Info: Evo X GSR, F250 Powerstroke Diesel
Question about the turbo chimney. Will this fit a aftermarket TMIC (APS)and aftermarket turbo (stock location 30r)? I still have my IC mounting holes in the same place.
#14
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Huntington Beach, CA / Troy, MI
Posts: 169
Car Info: 07 Forester XT WRB
Can you post up some pictures showing your setup? Thanks.