Shop in Minnesota-twin cities area
#1
Guest
Posts: n/a
Shop in Minnesota-twin cities area
Hello my name is shawn and I am the store manager of Propulshun Auto Sports. We are located in St. Paul, MN off of university avenue and pascal, about 2 blocks east of snelling. We specialize in sport compact performance parts and offer full installation. Our garage has 16 install bays 8 with lifts.
If you have any questions, need installation on anything or would like pricing on any products please give us a ring and ask for either Shawn or Yoom and we will help you out to the best of our abilities.
You can email me at shawn@propulshun.com or call us at 651-917-7747
Propulshun Auto Sports
1469 University Avenue
St. Paul, MN 55104
If you have any questions, need installation on anything or would like pricing on any products please give us a ring and ask for either Shawn or Yoom and we will help you out to the best of our abilities.
You can email me at shawn@propulshun.com or call us at 651-917-7747
Propulshun Auto Sports
1469 University Avenue
St. Paul, MN 55104
#2
Guest
Posts: n/a
Propulshun installed my aps tbe, gauges and pulley. They do great, professional work at very fair prices. I would wholeheartedly recommend them to anyone looking to get work done on their cars. I had a bit of trouble with one of my gauges and they took care of me the very day I called. I've been waiting for a shop like this for a long time. I will definately be a repeat customer for future installs and will probably go through them for parts next time.
This is a good shop and good guys - they know their stuff. I was asking questions galore walking around their shop seeing the work they were doing including engine swaps, drooling over the various front clips of jdm cars esp. the skyline in the back.
Good luck with the business Shawn, I will be spreading the word of the great work Ron and the guys do and will be giving you more business come spring.
This is a good shop and good guys - they know their stuff. I was asking questions galore walking around their shop seeing the work they were doing including engine swaps, drooling over the various front clips of jdm cars esp. the skyline in the back.
Good luck with the business Shawn, I will be spreading the word of the great work Ron and the guys do and will be giving you more business come spring.
#4
Guest
Posts: n/a
its already on the way, should be any way they have the money already. its a mustang awd roller dyno. Its capable of awd, fwd, rwd, sport bikes, even suvs and duallies. I would expect it to be fully operational by middle of february or so, I will definately post once its good to go, otherwise feel free to check in.
shawn
shawn
#6
Guest
Posts: n/a
once the dyno is up and running most definately. ron from rs motors (installation side of the shop) and myself have played with the utec some already, once the dyno is up and running tuning shouldnt be a problem. most engine management systems run off of similar programs so tuning any kind of ems shouldnt be a problem once they get familiar with everything. ron is going to use one of his own cars with a aem ems and probably my mr2 with standalone ems as ginuea pigs just to get used to everything and that way no customers cars are at risk.
#9
Guest
Posts: n/a
Yes, that's right. The unichip does require costum tuning to specific mods, which requires a dyno. Do you guys do a variaty of vehicle such cars to trucks? I drive by a shop that is next to checkers I think, is that you guys? So when you guys get the dyno, what's gonna be the charge for how many pulls?
#11
Guest
Posts: n/a
alright i have some concrete news on the awd dyno. it will for sure be in the shop within 8 weeks, reason it will take so long is that they are made to order, so they put everything together when they get an order.
if you guys have any questions on anything please feel free to email me at: shawn@propulshun.com
if you guys have any questions on anything please feel free to email me at: shawn@propulshun.com