Official: Big Dogs Grill - Thursdays - thread
#1354
VIP Member
iTrader: (24)
Join Date: Dec 2004
Location: Wheeldude.com
Posts: 9,540
Car Info: RIP: 04 WRB SEDAN Now Rollin' in STi
weather is great right now. been sunny all day, but i havent even been outside to enjoy this weather. hope big dogs is a good turnout. we gotta welcome back dan and victoria
-Ave
-Ave
#1356
VIP Member
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: SBAIC-South BayArea Impreza Club-Campbell, CA-Thur
Posts: 3,648
Car Info: 2003 PSM STi
Originally Posted by yayitzian
he's gonna say no and hang out with us. haha
Well, Charlie....if I 'wooed' her that much...then that means that if I go home with her, I will be getting some action! w00t! and as much as I love hanging out with you all.........getting a piece is ALOT more enticing.....sorry guys. However, she knows that Thurs. is BDG night, so I dont think there will be any issues...other than the fact that she was in Oregon all day for work, and will be getting home just before we go to dinner, so she may be tired. But she's a trooper.
-Ted
#1359
VIP Member
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: SBAIC-South BayArea Impreza Club-Campbell, CA-Thur
Posts: 3,648
Car Info: 2003 PSM STi
......I have a story to tell y'all...... .......yesterday, I get home from work, chill for a bit, and then realize that my little message light is blinking on my answer machine. I think; "hmmmmm, I wonder who called me and left a message." So I walk over to the machine and push the little button with the blinking light, and I hear a message from Gruppe-S....!!!!..... they say, that my Twin Scroll turbo, header and up pipe just came in, and I can come pick them up anytime..... I'm like w00t!!!!!!!!!1one.....
Today on my lunch break I drive over there feeling like a little kid that just woke up Xmas morning...I get there, and Preston is there, I say wasssssup, and he says HI....then he says that yes....my parts are in......BUUUUUUUT......they haven't been taken off of the engine that they were shipped on yet, so I can see them, but I cant take them home yet. so I say yea, I wanna see 'em, so atleast I have a mental pic to drool over all day....heh heh heh....Anyways, I ended up paying off the balance I owed them for it, and picking up their LAST, stashed away, hidden Walbro 255. So atleast I had something to take home with me.
Anyways, Preston said that he MAY be able to talk someone into taking it off for me today, and if so, he would bring it to me at BDG tonight! So we'll see.... <keeping my fingers crossed>
So now all I have left to buy on my shopping list are:
STI injectors
TGV delete
STI Oil Pan
JDM/aftermarket twin scroll Downpipe
and the list of stuff I have waiting to put in:
JDM STI TMIC
Perrin Fuel rails
Walbro 255
*JDM Spec-C Twin Scroll Turbo VF37 (Will be sent to Deadbolt for a full P&P and ceramic coating ASAP.)
*JDM Twin Scroll Header
*JDM Twin Scroll Uppipe
(*=see story above for more details.)
Any who...here's my dyno sheet from last Sat @ Gruppe-S Dyno Day. This will be used as my baseline.
Not too shabby, gotta love that torque curve though.
209.4 @ 5500 whp
215 @ 3500 ft/lbs
Today on my lunch break I drive over there feeling like a little kid that just woke up Xmas morning...I get there, and Preston is there, I say wasssssup, and he says HI....then he says that yes....my parts are in......BUUUUUUUT......they haven't been taken off of the engine that they were shipped on yet, so I can see them, but I cant take them home yet. so I say yea, I wanna see 'em, so atleast I have a mental pic to drool over all day....heh heh heh....Anyways, I ended up paying off the balance I owed them for it, and picking up their LAST, stashed away, hidden Walbro 255. So atleast I had something to take home with me.
Anyways, Preston said that he MAY be able to talk someone into taking it off for me today, and if so, he would bring it to me at BDG tonight! So we'll see.... <keeping my fingers crossed>
So now all I have left to buy on my shopping list are:
STI injectors
TGV delete
STI Oil Pan
JDM/aftermarket twin scroll Downpipe
and the list of stuff I have waiting to put in:
JDM STI TMIC
Perrin Fuel rails
Walbro 255
*JDM Spec-C Twin Scroll Turbo VF37 (Will be sent to Deadbolt for a full P&P and ceramic coating ASAP.)
*JDM Twin Scroll Header
*JDM Twin Scroll Uppipe
(*=see story above for more details.)
Any who...here's my dyno sheet from last Sat @ Gruppe-S Dyno Day. This will be used as my baseline.
Not too shabby, gotta love that torque curve though.
209.4 @ 5500 whp
215 @ 3500 ft/lbs
Last edited by GotBoost?; 03-24-2005 at 07:39 PM.
#1362
Registered User
Join Date: Feb 2005
Location: San Jose, CA
Posts: 507
Car Info: 2000 2.5 RS (really slow)
Deadbolt P&P...eh, herd some (and seen some) ****ty Ports...no offense, check it before you install it Sounds like you got a project going there GotBoost? What made you go with a VF37? Just curious.
#1363
VIP Member
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: SBAIC-South BayArea Impreza Club-Campbell, CA-Thur
Posts: 3,648
Car Info: 2003 PSM STi
Originally Posted by 1WRXNFX
Deadbolt P&P...eh, herd some (and seen some) ****ty Ports...no offense, check it before you install it Sounds like you got a project going there GotBoost? What made you go with a VF37? Just curious.
Well......2 things....
#1 availability
#2 price
The only other Twinscroll setup I was able to locate (that will bolt on w/o any welding involved) is the GPMoto GT32 kit......and at $6k, I was not about to go there. Then I found the V8 Spec-C set, and was surprised at the fact that they are only around $1500 or so for the header, uppipe AND Turbo. Plus its a ball bearing Turbo, versus, the V7 setup that uses the VF36 which is a bushing turbo (similar to the diff. between the VF30 and VF34).
So I'm curious....what have you seen/heard about deadbolts work? I have seen Jeremys VF22 that he had them do, and it looks peeeeerty. Are there any other shops that will perform a similar service? I esp. like the Ceramic coating they do too.
-Ted
#1364
VIP Member
iTrader: (17)
Join Date: Jul 2004
Location: Northern California
Posts: 3,969
Car Info: 04 STi
Ted... I cannot wait to hear your car when you have the twin scroll set up.
I've always been curious as to what a two turbine turbo sounded like and felt like. Please give me a ride when it's all in and tuned.
-GDO
I've always been curious as to what a two turbine turbo sounded like and felt like. Please give me a ride when it's all in and tuned.
-GDO
#1365
Originally Posted by Onizuka
I've always been curious as to what a two turbine turbo sounded like and felt like.
There are no differences between the turbine wheels used in open or single inlet turbines compared to those used in twin or divided inlet turbines.
Cheers
Preston