Grand Prix @ K1 Speed San Francisco
#94
Registered User
iTrader: (1)
Join Date: Nov 2002
Location: San Francisco
Posts: 5,351
Car Info: 1.8L FWD
to me it's not the fact of who requires SA, but more of a safety issue if you get in a accident or catch on fire in a car.
yet K1 is the only place that doesn't require neck braces. strange if you ask me.
why am i not on the list? you don't want me to go?
for helmets, i would just take a drive to Sears Point and visit Wine Country Motorsports.
for helmets, i would just take a drive to Sears Point and visit Wine Country Motorsports.
#101
Registered User
iTrader: (7)
SA uses a higher density foam next to your head, causing more damage in low impact incidents. Like you would get from hitting your head against a window glass and or a roll cage. SA which is Snell Approval, is better for higher speed impacts (80mph~ and above).
Back on topic: 27th is very possible.
#102
SA is fire resistant.
From Snell's FAQ
The odd bit... A lot of SA helmets are open face.
I do value safety. But I also don't feel the need to overdo it and in some cases, certain safety equipment can be dangerous in the wrong applications. However, I assume Jansen will be in a firesuit.
From Snell's FAQ
- The SA standard requires flammability test while the M and K standards do not.
- The SA and K standards allow for a narrower visual field than the M standard (Some SA and K certified helmets may not be street legal).
- The SA and K standards include a rollbar multi-impact test while the M standard does not.
I do value safety. But I also don't feel the need to overdo it and in some cases, certain safety equipment can be dangerous in the wrong applications. However, I assume Jansen will be in a firesuit.
#103
Registered User
iTrader: (7)
I would LOVE to see their flammability test, is it fire proof paint? haha. If your helmet catches fire, it catches fire, you won't be immune.
DOT is plenty for anything you're doing, unless you are exceeding speeds of 95-100mph. I would only purchase an SA helmet if it were required. Other than that I would buy a quality DOT only helmet, to prevent concussions at lower impact speeds.
If in a fire suit and it's required, then yeah get it.
DOT is plenty for anything you're doing, unless you are exceeding speeds of 95-100mph. I would only purchase an SA helmet if it were required. Other than that I would buy a quality DOT only helmet, to prevent concussions at lower impact speeds.
If in a fire suit and it's required, then yeah get it.
SA is fire resistant.
From Snell's FAQ
The odd bit... A lot of SA helmets are open face.
I do value safety. But I also don't feel the need to overdo it and in some cases, certain safety equipment can be dangerous in the wrong applications. However, I assume Jansen will be in a firesuit.
From Snell's FAQ
The odd bit... A lot of SA helmets are open face.
I do value safety. But I also don't feel the need to overdo it and in some cases, certain safety equipment can be dangerous in the wrong applications. However, I assume Jansen will be in a firesuit.
#104
Again, from Snell's website.
Flame Resistance Test
The flame resistance test applies to special application racing helmets only. The test is conducted using a propane flame of approximately 790 degrees centigrade. The flame is applied to the shell, trim, chin strap and face shield for a specified number of seconds, and any resulting fire must self extinguish within a specified time after flame removal. During the whole process the temperature of the interior lining of the helmet must not exceed 70 degrees centigrade.
The flame resistance test applies to special application racing helmets only. The test is conducted using a propane flame of approximately 790 degrees centigrade. The flame is applied to the shell, trim, chin strap and face shield for a specified number of seconds, and any resulting fire must self extinguish within a specified time after flame removal. During the whole process the temperature of the interior lining of the helmet must not exceed 70 degrees centigrade.
Last edited by JourdanWithaU; 01-03-2013 at 11:57 AM.