WRX 6MT Swap -- Part 2
#16
Registered User
Join Date: Dec 2002
Location: new milford, ct
Posts: 79
Car Info: 02 silver impreza wrx
so if i find a legacy rear end, all i have to do is switch over the wrx internals, and get the ring gear from the legacy pressed on to the wrx lsd rear. sounds easy enough. what year legacy do i have to get the rear off?.
oh and is the legacy rear a r160, or an r180? if so do i have to change the axles over, or can i use my stockers?
so many questions, so little time..
by the way, if anyones selling a 6mt, i am interested, so let me know.
oh and is the legacy rear a r160, or an r180? if so do i have to change the axles over, or can i use my stockers?
so many questions, so little time..
by the way, if anyones selling a 6mt, i am interested, so let me know.
#17
Registered User
iTrader: (5)
Join Date: Nov 2002
Location: Kandahar, Afghanistan
Posts: 1,305
Car Info: 09 E90 M3 SEDAN w/DCT
Yes, it is that simple. And, to your surprise, you only have to bolt the ring gear in, not press it! Just use some good locktite ln the 5 or 10 bolts.
I am not sure of the year of the Legacy diff, but I will find out ASAP for you.
They are both R160, no axle changes required...no worries. I just bought a complete R180/Axles/Hubs/Brembo setup, that is why I am selling my rear undercarriage.
Hope my info helps.
Andy
I am not sure of the year of the Legacy diff, but I will find out ASAP for you.
They are both R160, no axle changes required...no worries. I just bought a complete R180/Axles/Hubs/Brembo setup, that is why I am selling my rear undercarriage.
Hope my info helps.
Andy
#18
Guest
Posts: n/a
Where do you get this stuff
BadWRX
Where did you find out about swapping? How much does it cost if you aren't a mechanic (if you dont mind telling)? You said its and easy bolt on/ swap but where does 1 find the parts to do it? How is the performance of the 6MT? Any problems that we should know about?
"I just bought a complete R180/Axles/Hubs/Brembo setup, that is why I am selling my rear undercarriage." -- BADWRX
Where did you get it and how much? Is this gonna be as easy a swap as your old set-up?
Sorry for asking so many questions but im sure im not the only 1 that wants to know. Thanks for all the info so far BADWRX its greatly appricated.
Where did you find out about swapping? How much does it cost if you aren't a mechanic (if you dont mind telling)? You said its and easy bolt on/ swap but where does 1 find the parts to do it? How is the performance of the 6MT? Any problems that we should know about?
"I just bought a complete R180/Axles/Hubs/Brembo setup, that is why I am selling my rear undercarriage." -- BADWRX
Where did you get it and how much? Is this gonna be as easy a swap as your old set-up?
Sorry for asking so many questions but im sure im not the only 1 that wants to know. Thanks for all the info so far BADWRX its greatly appricated.
#19
Guest
Posts: n/a
I'm also interested in this swap and money wise.
I'd love to drop 6mt in my 03 wrx.. Besides all the advtages it also can use another gear too for highway driving.
thx
I'd love to drop 6mt in my 03 wrx.. Besides all the advtages it also can use another gear too for highway driving.
thx
#20
Guest
Posts: n/a
Imprezer!!!
Hey Imprezer
Thanks for all the info but could you by chance tell us where to get the 6mt and all the parts if we wanted to do a swap?
Thanks for all the info but could you by chance tell us where to get the 6mt and all the parts if we wanted to do a swap?
#21
Registered User
iTrader: (7)
Join Date: Dec 2002
Location: Sacramento CA
Posts: 10,029
Car Info: 02 Impreza WRX sedan
Originally posted by vadim
I'm also interested in this swap and money wise.
I'd love to drop 6mt in my 03 wrx.. Besides all the advtages it also can use another gear too for highway driving.
thx
I'm also interested in this swap and money wise.
I'd love to drop 6mt in my 03 wrx.. Besides all the advtages it also can use another gear too for highway driving.
thx
__________________
--
^ww^
"...axles of evil..." - George W. Bush
#22
Guest
Posts: n/a
Does anyone know the length difference between the the Sti rear axles and the US OEM sedan rear axles?
Also, is there a difference in the spline diameter and spline count?
Does anyone have a copy of the Subaru parts catalog on CD that they wouldn't mine burning a copy for a fellow WRX enthusiast?
Also, is there a difference in the spline diameter and spline count?
Does anyone have a copy of the Subaru parts catalog on CD that they wouldn't mine burning a copy for a fellow WRX enthusiast?
#23
Registered User
iTrader: (12)
Join Date: Nov 2002
Location: Reno, NV
Posts: 18,369
Car Info: 1993/2000/2001 GF4 mostly red
Originally posted by RSierra
Does anyone know the length difference between the the Sti rear axles and the US OEM sedan rear axles?
Also, is there a difference in the spline diameter and spline count?
Does anyone have a copy of the Subaru parts catalog on CD that they wouldn't mine burning a copy for a fellow WRX enthusiast?
Does anyone know the length difference between the the Sti rear axles and the US OEM sedan rear axles?
Also, is there a difference in the spline diameter and spline count?
Does anyone have a copy of the Subaru parts catalog on CD that they wouldn't mine burning a copy for a fellow WRX enthusiast?
#24
Registered User
iTrader: (12)
Join Date: Nov 2002
Location: Reno, NV
Posts: 18,369
Car Info: 1993/2000/2001 GF4 mostly red
Originally posted by Wingless Wonder
Hmm, I seem to recall that the 6MT ratios were more tightly spaced, but that 6th gear ended up being slightly less overdriven than 5th in the 5MT. I just can't remember where I might have seen this, though... sorry. The 6MT's chief advantage is strength and durability, not necessarily performance. It's a tough *****.
Hmm, I seem to recall that the 6MT ratios were more tightly spaced, but that 6th gear ended up being slightly less overdriven than 5th in the 5MT. I just can't remember where I might have seen this, though... sorry. The 6MT's chief advantage is strength and durability, not necessarily performance. It's a tough *****.
#25
Guest
Posts: n/a
Hey Imprezer do you have any sources for the rear differentials and axle shafts.. also wondering if i would need the front axles from an sti since i am planning a 2.0T sti swap into a rs since insurance will be cheaper than sti
#26
Guest
Posts: n/a
I am assuming that if you have to shift 3 times with the 6MT and only 2 with the 5MT, that the lighter 5MT package would be a better choice for stock 0-60 speeds. As you upgrade your stock engine to overcome the shifting delays and added weight, the 6MT would be a more sensible and reliable choice. I've never driven a 6MT though and don't know that you are truely forced to shift into 3rd to make it to 60mph.
With that in mind, I would love to know:
- Est. price to purchase parts required to do the 5->6 conversion without mods to the car or the parts.
- Est. price to sell old package. (Would love to trade with a cash-starved STi owner who wants a better 0-60)
- Does the 6th gear improve the situation with the 5MT's 5th gear sucking gas at freeway speeds?
- Does the entire package open the possibillity of installing that variable center diff. controller we've seen in the new STi pics?
- What is the weight change from 5MT package to 6MT? Est. is fine but if you have the parts, and a scale.. ?
That's a trickey list but the first person who could nail all the Q's would likely have some customers who, at the very least, could be refered to a friend's garage.
With that in mind, I would love to know:
- Est. price to purchase parts required to do the 5->6 conversion without mods to the car or the parts.
- Est. price to sell old package. (Would love to trade with a cash-starved STi owner who wants a better 0-60)
- Does the 6th gear improve the situation with the 5MT's 5th gear sucking gas at freeway speeds?
- Does the entire package open the possibillity of installing that variable center diff. controller we've seen in the new STi pics?
- What is the weight change from 5MT package to 6MT? Est. is fine but if you have the parts, and a scale.. ?
That's a trickey list but the first person who could nail all the Q's would likely have some customers who, at the very least, could be refered to a friend's garage.
#27
Guest
Posts: n/a
6MT
BadWRX, help me out here with a price, can you est. what the total price was to change your 5MT to a 6MT? I desperately want my rex to be a 6-speed..... but not if its going to cost me $3k
#28
It will cost you far more than 3k
I would estimate 12hrs labor plus parts
parts are hard to guess I have seen DCCD trans go for 5500
And about what rear ends that can be used for the swap ALL subaru r160 rear end that Is anything that is 4wd but I don't know about SVX rear ends
not that you are going to get a svx rear end for a good price anyway.
the older cars had stub shafts that go to the half shafts the new ones don't have these stub shafts but as long as you are going to use your carrier they do not matter.
Note the side plates should be changed along with the carrier and contact pattern along with backlash should always be checked when you are playing with ring and pinon gears
I would estimate 12hrs labor plus parts
parts are hard to guess I have seen DCCD trans go for 5500
And about what rear ends that can be used for the swap ALL subaru r160 rear end that Is anything that is 4wd but I don't know about SVX rear ends
not that you are going to get a svx rear end for a good price anyway.
the older cars had stub shafts that go to the half shafts the new ones don't have these stub shafts but as long as you are going to use your carrier they do not matter.
Note the side plates should be changed along with the carrier and contact pattern along with backlash should always be checked when you are playing with ring and pinon gears
Last edited by bamfwrx; 01-29-2003 at 01:42 PM.
#30
Guest
Posts: n/a
Originally posted by BAN SUVS
I seem to recall this too, I was disappointed I wouldn't be able to reduce revs and improve my measly 26 mpg on the freeway. 3100@75mph sucks *****.
I seem to recall this too, I was disappointed I wouldn't be able to reduce revs and improve my measly 26 mpg on the freeway. 3100@75mph sucks *****.