Wagons_Ho!

iTrader: (1)

I have Plug and Play harnesses available for a number of Subaru uses..

- I have PNP headlamp adapters with 3 plugs (9007, 9005 and H1), no cutting crimping soldering or grinding down of a non-OEM connector to fit. This is weather resistant, like the stock OEM connectors should be. 55USD shipped (the H1 connectors were 17bux a piece to my door with the quantities I had to buy - 100 housings, 12000 terminals).

- Levelling switches and harnesses. I make one using the black OEM plugs and connectors onto the switch. I use a circuit adder for power, and even the ground wire is included. My 13yo girl installed it on my TS wagon in 15 mins with the headlights out. Switch included. 170USD shipped

- Orciari levelling setup. I have wired the Orciaris to adjust level, and I make adapter harnesses that don't use vampire taps for this liight setup.

- Next on the list - JDM HID install adapters and UK300 harnesses and levelling setup.

- After that ECU adapter harnesses.

Let me know by email if interested.

Thanks.