Newest Mods: New Grill / Clear Markers
#1
Guest
Posts: n/a
Newest Mods: New Grill / Clear Markers
I picked up the markers on sale for $20 shipped
and the Grill was about $35 listed as an "RS Style Grill"
Definitly worth the $35 for the grill, used all the OEM clips and poped right in perfect.
The clear sides had the same problems that I've heard almost everyone who's installed them site: they're really loose especialy on the passengers side. I remidied this with some electrical tape. Basicaly stacked 5 pieces on top of each other.. stuck it on the insde of the body where the top clip goes then took another piece and wraped around from on top of the stack I'd just made to the out side. Similar on the bottom but not as thick... Things are on there about as tight as stock now. ")
Thinking about adding eyelids and a grill for the scoop. Anyone know of a place that sells JUN replicas prepainted in the WRX Black?
and the Grill was about $35 listed as an "RS Style Grill"
Definitly worth the $35 for the grill, used all the OEM clips and poped right in perfect.
The clear sides had the same problems that I've heard almost everyone who's installed them site: they're really loose especialy on the passengers side. I remidied this with some electrical tape. Basicaly stacked 5 pieces on top of each other.. stuck it on the insde of the body where the top clip goes then took another piece and wraped around from on top of the stack I'd just made to the out side. Similar on the bottom but not as thick... Things are on there about as tight as stock now. ")
Thinking about adding eyelids and a grill for the scoop. Anyone know of a place that sells JUN replicas prepainted in the WRX Black?
#2
Guest
Posts: n/a
unpainted replica eyelids are all over on e-bay.
Side note on the clear markers: If yours came with a socket and bulb, there is a chance it might melt, and the socket/light will fall out of the housing. Happened to mine a few days ago. Now i decided to go with the carbon fiber sti markers.
Side note on the clear markers: If yours came with a socket and bulb, there is a chance it might melt, and the socket/light will fall out of the housing. Happened to mine a few days ago. Now i decided to go with the carbon fiber sti markers.
#3
Guest
Posts: n/a
Originally posted by eyeballs
If yours came with a socket and bulb, there is a chance it might melt, and the socket/light will fall out of the housing.
If yours came with a socket and bulb, there is a chance it might melt, and the socket/light will fall out of the housing.
#5
Guest
Posts: n/a
http://www.rsversion.com/details.asp?prodID=1156
and
http://store.yahoo.com/racerwheel/rt001156.html
I bought it at the second place because the first place had a really annoying sign up process to buy stuff
it fit pretty well in all the stock clips.. I had to get an exact an trim the right bottom clip just a little to get it to stay
and
http://store.yahoo.com/racerwheel/rt001156.html
I bought it at the second place because the first place had a really annoying sign up process to buy stuff
it fit pretty well in all the stock clips.. I had to get an exact an trim the right bottom clip just a little to get it to stay
Thread
Thread Starter
Forum
Replies
Last Post
InfamousDX
Interior, Exterior & Lighting
19
02-21-2003 09:41 AM