How to Strip Clear off Carbon Fiber?
#1
How to Strip Clear off Carbon Fiber?
I need to remove the clear coat that I sprayed onto my trunk so I can get the trunk lid re-cleared tomorrow.
I was told that Acetone would work to get the clear coat off. I've heard different things about the effect of acetone on the carbon fiber, but from what I understand as long as I don't soak the trunk in carbon fiber ( :/ ) then the carbon fiber can't be damaged.
I dont really care how the trunk looks, its not going to be shiny regardless once I strip the clear coat off. as long as it doesn't damage the epoxy resin, That would be just fine.
I was suggested by a paint guy to wetsand it with 800 grit sand paper, but that would take forever, imo is a terrible idea.
Can I use Acetone or is that bad and i should use something else?
I was told that Acetone would work to get the clear coat off. I've heard different things about the effect of acetone on the carbon fiber, but from what I understand as long as I don't soak the trunk in carbon fiber ( :/ ) then the carbon fiber can't be damaged.
I dont really care how the trunk looks, its not going to be shiny regardless once I strip the clear coat off. as long as it doesn't damage the epoxy resin, That would be just fine.
I was suggested by a paint guy to wetsand it with 800 grit sand paper, but that would take forever, imo is a terrible idea.
Can I use Acetone or is that bad and i should use something else?
Thread
Thread Starter
Forum
Replies
Last Post
ImportImage
Exterior / Interior Lighting
60
01-18-2007 07:44 AM
file_id
SoCal Classifieds
1
10-19-2006 07:28 AM
subyfanatic
Tri-State
2
09-26-2003 08:53 PM
wizardWRX
Interior, Exterior & Lighting
4
01-27-2003 07:19 PM