'06 WRX (can seat belt reminder chime be disabled?)
09-17-2006 | 05:37 PM
#1
Thread Starter
Registered User
Joined: Jul 2006
Posts: 16
From: Chicago
Car Info: Nothing
Thanks for all your help guys. Ive been running premium in the last 2 tanks of gas since I did a lot of driving this weekend.
One last question though...Is there a way to stop the seatbelt noise. I always wear my seatbelt, but sometimes I will be sitting in the car not moving with my seatbelt off so I can look at a map / lean out to use an ATM / make out with a girl and that noise it killing me.
One last question though...Is there a way to stop the seatbelt noise. I always wear my seatbelt, but sometimes I will be sitting in the car not moving with my seatbelt off so I can look at a map / lean out to use an ATM / make out with a girl and that noise it killing me.
09-17-2006 | 06:27 PM
#2
Registered User
iTrader: (2)
Joined: Feb 2006
Posts: 1,900
From: Baja Oregon
Car Info: '05 Impreza Outback Sport ~ "WTF! Two-Toned?"
Originally Posted by thebruce44
Thanks for all your help guys. Ive been running premium in the last 2 tanks of gas since I did a lot of driving this weekend.
One last question though...Is there a way to stop the seatbelt noise. I always wear my seatbelt, but sometimes I will be sitting in the car not moving with my seatbelt off so I can look at a map / lean out to use an ATM / make out with a girl and that noise it killing me.
One last question though...Is there a way to stop the seatbelt noise. I always wear my seatbelt, but sometimes I will be sitting in the car not moving with my seatbelt off so I can look at a map / lean out to use an ATM / make out with a girl and that noise it killing me.
09-18-2006 | 01:10 PM
#3
Registered User
iTrader: (1)
Joined: Sep 2005
Posts: 61
From: Laurel, MD
Car Info: 94 Honda Accord...not for long
There are two methods...
First method:
1. Turn the ignition to ON. The engine should be off.
2. Within 30 seconds, insert the buckle in and out 20 times. You can hold the release button down if you like. Just make sure to remove the buckle all the way so that it "registers" in and out.
3. The next time you start the engine, you'll get the initial seatbelt chime, but it won't give you the continual warnings afterwards. You should notice right away that after the initial seatbelt chime, the seatbelt light will turn off and no longer flash.
Second method:
-reach under the drivers seat and unplug it...white connector between the yellows..dont touch the yellows...
-DISCLAIMER: I've heard rumors that unplugging this wire will also disable your air bag. I don't know if this is true or not.
First method:
1. Turn the ignition to ON. The engine should be off.
2. Within 30 seconds, insert the buckle in and out 20 times. You can hold the release button down if you like. Just make sure to remove the buckle all the way so that it "registers" in and out.
3. The next time you start the engine, you'll get the initial seatbelt chime, but it won't give you the continual warnings afterwards. You should notice right away that after the initial seatbelt chime, the seatbelt light will turn off and no longer flash.
Second method:
-reach under the drivers seat and unplug it...white connector between the yellows..dont touch the yellows...
-DISCLAIMER: I've heard rumors that unplugging this wire will also disable your air bag. I don't know if this is true or not.
09-18-2006 | 01:59 PM
#4
Registered User
iTrader: (2)
Joined: Feb 2006
Posts: 1,900
From: Baja Oregon
Car Info: '05 Impreza Outback Sport ~ "WTF! Two-Toned?"
Originally Posted by Thrillho
There are two methods...
First method:
1. Turn the ignition to ON. The engine should be off.
2. Within 30 seconds, insert the buckle in and out 20 times. You can hold the release button down if you like. Just make sure to remove the buckle all the way so that it "registers" in and out.
3. The next time you start the engine, you'll get the initial seatbelt chime, but it won't give you the continual warnings afterwards. You should notice right away that after the initial seatbelt chime, the seatbelt light will turn off and no longer flash.
Second method:
-reach under the drivers seat and unplug it...white connector between the yellows..dont touch the yellows...
-DISCLAIMER: I've heard rumors that unplugging this wire will also disable your air bag. I don't know if this is true or not.
First method:
1. Turn the ignition to ON. The engine should be off.
2. Within 30 seconds, insert the buckle in and out 20 times. You can hold the release button down if you like. Just make sure to remove the buckle all the way so that it "registers" in and out.
3. The next time you start the engine, you'll get the initial seatbelt chime, but it won't give you the continual warnings afterwards. You should notice right away that after the initial seatbelt chime, the seatbelt light will turn off and no longer flash.
Second method:
-reach under the drivers seat and unplug it...white connector between the yellows..dont touch the yellows...
-DISCLAIMER: I've heard rumors that unplugging this wire will also disable your air bag. I don't know if this is true or not.
Thread
Thread Starter
Forum
Replies
Last Post
Imprezer
Latest i-Club Reviews, Features, and Articles
39
12-30-2003 07:44 AM
