install drive belts
10-15-2007, 11:50 AM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northern Bay Area: Larkspur
Posts: 1,004
Car Info: 02 Silver WRX sedan. Eibach springs, Blitz NUR cat back, Rota 17" Attacks, Cobb AccessPort/DP
install drive belts
Does anyone have step by step instructions on how to replace the Drive belts? Not the timing belt, just the two drive belts. This is specifically for a 2002 WRX.
Thanks!
Thanks!
10-16-2007, 09:08 PM
#2
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northern Bay Area: Larkspur
Posts: 1,004
Car Info: 02 Silver WRX sedan. Eibach springs, Blitz NUR cat back, Rota 17" Attacks, Cobb AccessPort/DP
well I figured it out
I found a vid online. But basically you have to remove the plastic cover that is over the AC and alternator. Then for the alternator belt, you have to loosen the three bolts facing you. One is the pivot bolt, then there's the lock bolt, finally the adjustment bolt (up/down). Adjust it so the alternator is as far down as it will go and pull off the belt. For the AC belt, you have to loosen two bolts and adjust that pulley until it's down far enough to slide the belt off. Pretty simple.
10-16-2007, 09:12 PM
#3
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northern Bay Area: Larkspur
Posts: 1,004
Car Info: 02 Silver WRX sedan. Eibach springs, Blitz NUR cat back, Rota 17" Attacks, Cobb AccessPort/DP
Thread
Thread Starter
Forum
Replies
Last Post
CCC
Engine and Drivetrain
0
02-02-2012 10:09 AM
newyorkreload
Sacramento & Reno
1
07-06-2005 09:08 AM
stealth-wrx
For Sale by Members
4
11-24-2002 09:05 PM
