FS:18" Black/polished lip wheels and tires
#1
Registered User
Thread Starter
iTrader: (58)
Join Date: Sep 2005
Location: Waipahu,HI
Posts: 3,186
Car Info: '10 Xt Ltd, '05 X Beater, '01 GS300
FS:18" Black/polished lip wheels and tires
Just putting this out there to see if anybody is interested. Selling a set of Black with polished lip Flik Artic wheels mounted on Federal tires. The wheels are 5x100 bolt pattern, and are 18x8.5's with a +35 offset. They come with Federal SS595's in 255/35/18's with about 90% tread left. There is a bit of uneven wear, but not too bad, and there's tons of tread left. The wheels are in good shape, with only very minor scratches, but no dents or anything. Depending on your ride height, these will probably require a fender roll. Selling for $900. Here's a couple pics:
#8
Registered User
Thread Starter
iTrader: (58)
Join Date: Sep 2005
Location: Waipahu,HI
Posts: 3,186
Car Info: '10 Xt Ltd, '05 X Beater, '01 GS300
In all honesty, I won't be doing anything else. I actually shouldn't have even done anything at all. This car was only supposed to be the daily driver.......and then some how mysteriously, your springs ended up on it. And then Joey's old SSR's mounted themselves. I can't figure out how it happened?!
#9
Registered User
iTrader: (21)
Join Date: Nov 2007
Location: Storm Vanguard ONE
Posts: 2,075
Car Info: DoucheMobile
In all honesty, I won't be doing anything else. I actually shouldn't have even done anything at all. This car was only supposed to be the daily driver.......and then some how mysteriously, your springs ended up on it. And then Joey's old SSR's mounted themselves. I can't figure out how it happened?!
Hmm, I want some 18s for the Leggy. Not sure if I wanna roll my fenders though. Well, either way, bump for bran!
#10
Registered User
Thread Starter
iTrader: (58)
Join Date: Sep 2005
Location: Waipahu,HI
Posts: 3,186
Car Info: '10 Xt Ltd, '05 X Beater, '01 GS300
Tell Jon to do them for you. He's got my fender roller too. But yeah, depending on your suspension and ride height, you might not need to do anything else at all. The width and offset is not super aggressive, but it's the tires that may also make things a little tough.
#11
VIP Member
iTrader: (38)
In all honesty, I won't be doing anything else. I actually shouldn't have even done anything at all. This car was only supposed to be the daily driver.......and then some how mysteriously, your springs ended up on it. And then Joey's old SSR's mounted themselves. I can't figure out how it happened?!
#12
*Note I tried the g-forces not these rims Bran is selling.
#13
Registered User
Thread Starter
iTrader: (58)
Join Date: Sep 2005
Location: Waipahu,HI
Posts: 3,186
Car Info: '10 Xt Ltd, '05 X Beater, '01 GS300
Should only have to roll the rears. Just make sure you catch the front part of the rears where there's those plastic pieces. The people that rolled mine didn't and I was rubbing so bad, it was cutting into the sidewall a bit.
*Note I tried the g-forces not these rims Bran is selling.
*Note I tried the g-forces not these rims Bran is selling.
#15
Registered User
iTrader: (66)
Join Date: Sep 2003
Location: Windward, Oahu
Posts: 3,615
Car Info: 3 Sleepers: 05 LGT, 05 FXT, 02 WRX
Did you pick up the White LGT?
Hey Joey,
Did you end up picking up the White LGT?
If so, nice choice...If I didn't pick up the EVO, that would have been my choice for a car also...
Alright, have fun man!
Brent
Did you end up picking up the White LGT?
If so, nice choice...If I didn't pick up the EVO, that would have been my choice for a car also...
Alright, have fun man!
Brent