FS: 02-07 WRX/STi Perrin Down Pipe (used)
#7
Registered User
iTrader: (13)
Join Date: Feb 2010
Location: Honolulu
Posts: 841
Car Info: 2003 wrx with hta68 1994 Honda accord h22a
well i believe ted has a flat face and the divorced has a similar flow to a bellmouth. there was no need for 2 cents remarks. i was just trying to help jess with a sell, and ted with a part.
#8
Registered User
iTrader: (33)
Join Date: Nov 2002
Location: Boostin' troubles away - 4EAT Memories 12.87@103.2
Posts: 10,455
Car Info: 51E LHD V7 STI (2.0)
It doesn't have the same flow as a bell mouth down pipe either. The picture clearly showed it wasn't a bell mouth. I realize what you were doing but knowing the difference between the two and why one shouldn't be used vs the other is why I added my 5 cents.
#10
divorce vs bellmouth are a compete 180 of each other.
bellmouth=wastegate gasses mixes in immediately in the down pipe
divorce=wastegate gasses mixes in at a predetermined distance down the length of the down pipe. in the case of the Perrin it is about 6 inches down.
which is better? its controversial but defenately better than a flat plate or even the PDE which is only slightly larger than the stock flat plate.
bellmouth=wastegate gasses mixes in immediately in the down pipe
divorce=wastegate gasses mixes in at a predetermined distance down the length of the down pipe. in the case of the Perrin it is about 6 inches down.
which is better? its controversial but defenately better than a flat plate or even the PDE which is only slightly larger than the stock flat plate.