Wiring Connection for LED brake light on wing

Reply Subscribe

Thread Tools

Search this Thread

11-21-2005 | 06:12 AM

dubyuHO4

Thread Starter

Registered User

iTrader: (1)

Joined: Nov 2005

Posts: 147

From: 96818(Honolulu) /94102(SAN FRAN)

Car Info: AWD Peanut "i" IMPRETZA

Wiring Connection for LED brake light on wing

I haved slaped on my WRX wing for my wingless wrx but dont know which is positive and which is negative on the 3rd brake light wires. Does any one know what is what? For the wiring on the wing, wires are already indicated which is positive(red wire) and which is negative(black wire) on the wing. Can any one help me to get my LED light on my wing functioning>>>?????

Last edited by dubyuHO4; 11-21-2005 at 06:15 AM.

11-21-2005 | 07:04 AM

oldmansan

Registered User

iTrader: (4)

Joined: Dec 2002

Posts: 2,176

From: Southern California

Car Info: 2016 Z51 C7, 2007 Exige S, 2008 ZX-10R, 2016 Taco

Find

a friend with a multimeter. It'll take you all of 30 seconds.

San

11-21-2005 | 11:08 AM

iNfEk

Registered User

iTrader: (33)

Joined: Nov 2002

Posts: 10,455

From: Boostin' troubles away - 4EAT Memories 12.87@103.2

Car Info: 51E LHD V7 STI (2.0)

Ok don't take this the wrong way but why are you trying to tap into the 3rd brake light?

For the factory wing there is a harness that is already residing in your trunk for this purpose. It is on the passenger side behind the grey material lining your trunk. if you have the harness that comes with the wing when you purchase it then you would just plug it straight in. Unfortunately by the way you're writing this it seems as though you don't have it.

I'm not sure since it's been a while since I've done my wing myself but the harness might have a black and red wire as well.

Jon