What would U Recommend!!!
#1
VIP Member
Thread Starter
iTrader: (39)
Join Date: Jun 2005
Location: Seibukan Dojo /HI. Kendo Federation
Posts: 4,939
Car Info: Seishin-teki kyōkō/Intonjutsu/Shinobi-ir
What would U Recommend!!!
Ok guys, well I just put in my second Strut Bar setup..Now the thing is that those two bolts that hold the bracket for the AC line(which the AC line resides right below the Strut Bar),the bottom bolt for the AC line bracket breaked!!! I broke the Hexagon head off and now I have just 1/4 of the stem of the bolt sticking out and 3/4 are in the hole!!! I used from Pliers to Needle nose pliers, to even a vice grip but nothing has a complete grab for me to atleast turn and loosen the stem of the bolt so I can unscrew it off!!
Now, any tips or advice for me to get it out!!!
Thanks for looking,
Now, any tips or advice for me to get it out!!!
Thanks for looking,
#3
#4
you can try grab a grinder and make two parallel flat sides on the bolt so its not completly round, then try the vise grip again. also spray some type of penetrating oil like wd 40
#5
VIP Member
Thread Starter
iTrader: (39)
Join Date: Jun 2005
Location: Seibukan Dojo /HI. Kendo Federation
Posts: 4,939
Car Info: Seishin-teki kyōkō/Intonjutsu/Shinobi-ir
Thanks Bobby, Jimmy, and DirteeBoy808...I used my dremmel and grinded a line and used a flat head to get it out...
Much Mahalo's...
Much Mahalo's...
Thread
Thread Starter
Forum
Replies
Last Post
Ali G
Sacramento & Reno
14
02-28-2005 01:04 PM
tim
Engine/Power - EJ25T (STI and 2006+ WRX)
4
02-25-2005 11:57 AM