Thanks WRXed, 808Subaru, iNfek & Hoppie!
#1
VIP Member
Thread Starter
iTrader: (25)
Join Date: Aug 2004
Location: Spokane, WA
Posts: 7,925
Car Info: '04 WRX Wagon
Thanks WRXed, 808Subaru, iNfek & Hoppie!
Big ups to Ty, Chris, Dan and Jon for coming out to Ty's house!
Lot's of stuff accomplished even though we all left sunburnt and dizzy.
BTW...I got a weird rattle that sounds like it is coming from that hangar thing that is on the bottom of the DP. It rattles when I am in either 1st or 2nd and let go of gas without pressing on the clutch (sorry technical terms not working tonight).
It also rattles when I take a sort of hard left like if you're on a road and just testing your handling at like 20 MPH. I think it's coming from that clip/hangar thingamabob...is there anything I can use to wedge in there like a piece of rubber or something that can handle heat? If I don't hear back I'll go to checker's and see if they have anything.
P.S. it did it when I was reversing into my stall too...basically anything that makes the engine shake.
Lot's of stuff accomplished even though we all left sunburnt and dizzy.
BTW...I got a weird rattle that sounds like it is coming from that hangar thing that is on the bottom of the DP. It rattles when I am in either 1st or 2nd and let go of gas without pressing on the clutch (sorry technical terms not working tonight).
It also rattles when I take a sort of hard left like if you're on a road and just testing your handling at like 20 MPH. I think it's coming from that clip/hangar thingamabob...is there anything I can use to wedge in there like a piece of rubber or something that can handle heat? If I don't hear back I'll go to checker's and see if they have anything.
P.S. it did it when I was reversing into my stall too...basically anything that makes the engine shake.
#2
Registered User
iTrader: (29)
Join Date: Jan 2005
Location: Hawaii
Posts: 2,289
Car Info: 02' wrb wrx w/ RGII
Originally Posted by bpang1
Big ups to Ty, Chris, Dan and Jon for coming out to Ty's house!
Lot's of stuff accomplished even though we all left sunburnt and dizzy.
BTW...I got a weird rattle that sounds like it is coming from that hangar thing that is on the bottom of the DP. It rattles when I am in either 1st or 2nd and let go of gas without pressing on the clutch (sorry technical terms not working tonight).
It also rattles when I take a sort of hard left like if you're on a road and just testing your handling at like 20 MPH. I think it's coming from that clip/hangar thingamabob...is there anything I can use to wedge in there like a piece of rubber or something that can handle heat? If I don't hear back I'll go to checker's and see if they have anything.
P.S. it did it when I was reversing into my stall too...basically anything that makes the engine shake.
Lot's of stuff accomplished even though we all left sunburnt and dizzy.
BTW...I got a weird rattle that sounds like it is coming from that hangar thing that is on the bottom of the DP. It rattles when I am in either 1st or 2nd and let go of gas without pressing on the clutch (sorry technical terms not working tonight).
It also rattles when I take a sort of hard left like if you're on a road and just testing your handling at like 20 MPH. I think it's coming from that clip/hangar thingamabob...is there anything I can use to wedge in there like a piece of rubber or something that can handle heat? If I don't hear back I'll go to checker's and see if they have anything.
P.S. it did it when I was reversing into my stall too...basically anything that makes the engine shake.
i have the same problem also with my exhaust...rattles and hitting ...well let me know if u find a way to solve this problem..shoots
#3
Registered User
iTrader: (33)
Join Date: Nov 2002
Location: Boostin' troubles away - 4EAT Memories 12.87@103.2
Posts: 10,455
Car Info: 51E LHD V7 STI (2.0)
Did you install the turbo heat shield? if so then it could be the turbo heat shield... If you didn't put back all the screws and didn't cut the heat shield enough then it can rattle enough to hear what you're hearing.
For that exhaust support bracket... you might have to tighten the bolt down since it shouldn't rattle unless you didn't tighten it. It could also just be it's a very tight connection on the exhaust causing any engine flexing to make things shift and binde.
check that turbo heat sheild though.
Jon
For that exhaust support bracket... you might have to tighten the bolt down since it shouldn't rattle unless you didn't tighten it. It could also just be it's a very tight connection on the exhaust causing any engine flexing to make things shift and binde.
check that turbo heat sheild though.
Jon
#5
VIP Member
Thread Starter
iTrader: (25)
Join Date: Aug 2004
Location: Spokane, WA
Posts: 7,925
Car Info: '04 WRX Wagon
Originally Posted by iNfEk
Did you install the turbo heat shield? if so then it could be the turbo heat shield... If you didn't put back all the screws and didn't cut the heat shield enough then it can rattle enough to hear what you're hearing.
For that exhaust support bracket... you might have to tighten the bolt down since it shouldn't rattle unless you didn't tighten it. It could also just be it's a very tight connection on the exhaust causing any engine flexing to make things shift and binde.
check that turbo heat sheild though.
Jon
For that exhaust support bracket... you might have to tighten the bolt down since it shouldn't rattle unless you didn't tighten it. It could also just be it's a very tight connection on the exhaust causing any engine flexing to make things shift and binde.
check that turbo heat sheild though.
Jon
#6
Registered User
iTrader: (4)
Join Date: Oct 2004
Location: West Seattle.
Posts: 851
Car Info: '13 WRX Hatch OBP
The part that the dp hooks on to was a little bent when we put it on. The HKS is notorious for the rattle, mine did since yours is designed very similar could be that. How bad is it? Really loud or just loud enough to hear (and annoy)? If it is bad, I can help you bend it back.
And muchas gracias to all the above people and yourself for the help. You guys are the best. Thanks again. And let me know if the bolt is too loud.
And muchas gracias to all the above people and yourself for the help. You guys are the best. Thanks again. And let me know if the bolt is too loud.
#7
Registered User
iTrader: (38)
Join Date: Oct 2003
Location: rightBehindYou, HI
Posts: 7,783
Car Info: 1973 Huevo Ranchero
Originally Posted by bpang1
Lot's of stuff accomplished even though we all left sunburnt and dizzy.
.
.
aloha from the summit of *-^-Mauna Kea-^-*
#10
Registered User
iTrader: (4)
Join Date: Oct 2004
Location: West Seattle.
Posts: 851
Car Info: '13 WRX Hatch OBP
Don't really remember. I remember 2 o'clock, then I was home, and all of our cars were done. I think I realized I was home about 8pm. Sun and laying on hot black asphalt looking a thounds of nuts and bolts that look the same eally hurts the cranium.
Im so friggin sunburnt, holy crap. I have the a/c on fan blowing and I'm still sweating. Dammit, I keep forgetting Im not brown.
Im so friggin sunburnt, holy crap. I have the a/c on fan blowing and I'm still sweating. Dammit, I keep forgetting Im not brown.
#11
Registered User
iTrader: (16)
Join Date: Jun 2004
Location: mid-atlantic/va
Posts: 3,823
Car Info: 09 xt
Originally Posted by Hoppie
Don't really remember. I remember 2 o'clock, then I was home, and all of our cars were done. I think I realized I was home about 8pm. Sun and laying on hot black asphalt looking a thounds of nuts and bolts that look the same eally hurts the cranium.
Im so friggin sunburnt, holy crap. I have the a/c on fan blowing and I'm still sweating. Dammit, I keep forgetting Im not brown.
Im so friggin sunburnt, holy crap. I have the a/c on fan blowing and I'm still sweating. Dammit, I keep forgetting Im not brown.
#12
Registered User
iTrader: (14)
Join Date: Jan 2003
Location: Honolulu, HI
Posts: 1,224
Car Info: 1991 Toyota MR-2 Turbo
I should have taken a few pics of you guys. *lol* I've been working so much lately that I had to spend quality time with the wifey, couldn't stay and hang out w/ you guys. Sorry.
#13
VIP Member
Thread Starter
iTrader: (25)
Join Date: Aug 2004
Location: Spokane, WA
Posts: 7,925
Car Info: '04 WRX Wagon
The rattling is pretty loud...like a midget is lying under my car and tapping my floor with a little midget hammer.
DAMN YOU MIDGET!
I'll see what I can do this afternoon...I might try to gorilla that F$cker or use something soft (what? i have no clue).
All the other bolts/nuts are tight.
DAMN YOU MIDGET!
I'll see what I can do this afternoon...I might try to gorilla that F$cker or use something soft (what? i have no clue).
All the other bolts/nuts are tight.