Mach5WRX

iTrader: (9)

http://forums.nasioc.com/forums/show...hreadid=478598

kawshon1

iTrader: (14)

was the car on stands or on the ground when pic was taken?

any difference with the link, loaded and not loaded?

Mach5WRX

iTrader: (9)

It was on ramps so it was loaded. I'll go put in on stands and look at it.

kawshon1

iTrader: (14)

well after i posted, I figured that you wouldnt be able to get under to take the pic if it wasnt suspened hehehe.


But since it was on ramps, it sorta simulates what it would be like on the ground. (loaded) So.....I have no idea, it looks pretty weird to me...g/l

Mach5WRX

iTrader: (9)

I know and if this is normal that looks like a lot of play. I'll email Tom@Kartboy and see what he has to say.

silver satin

iTrader: (7)

Hey Dan, mine are the exact same when I first seen them I was like what is going on but until now I forgot about them. The picture was taken from the front right because the back end links on my car look normal the front is what looks messed up...on my car..

oldmansan

iTrader: (4)

like the sway bar isn't centered. When I installed my Noltec front sway bar links, I loosened all the sway bar bushing mounts and centered the wheels so that when the links were tight the bar was centered.

San

Mach5WRX

iTrader: (9)

Hey San,
Where do you get your Noltec stuff?

oldmansan

iTrader: (4)

I have my front stock links if you think yours is jacked. I don't think it is. I'd pull it off and make sure it swivels freely.

San

silver satin

iTrader: (7)

Well then if his are messed up then the ones on my car are also. There fine, I doubt both cars are messed up.

Mach5WRX

iTrader: (9)

I don't think they are messed up. But I do think it's time to upgrade.

silver satin

iTrader: (7)

The way they are angled can't be good looks like it is putting undo stress on them...All the parts you piling up your gonna need an install weekend not install day

oldmansan

iTrader: (4)

Excellent price, and service from Oakos and Noltec. I am almost positive your links are good. They swivel a lot. However, they should be nearly identical between sides. Your wheels were pointed straight, right?

San

silver satin

iTrader: (7)

San, are your end links the same as the one's on our cars because I did a search and really didn't find much. I know the ones on a RS are different I think...HEY San disregard dumb question found my answer had to look in a different place.