suggestions welcome!!!
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: BAY-VALLEY
Posts: 164
Car Info: 2006 STI-05 TAILS
2006 sti project(suggestions welcome!!!)
well i'm planning a big project for my 2006 sti... "black on gold" and ive picked out some parts, and theres some that i still am kinda ummm.. iffy on!! i posted this in the perfomance area, but i thought my fellow hawaiin subie enthusiasts could help a lil more.. u seem a tad more knowledgable then the rest of the world!!!!!! well maybe except japan.. j/k.. i kid i kid! thanx a bunch!
KOLI IOKEPA(OR CORY)
EXHAUST-
HELIX CAT BACK-stainless mendrel bent
GRUPPE-S V2 MANIFOLD-stainless mendrel bent
ENGINE-
PERRIN FRONT MOUNT
PERRIN GT30 or GT35 KIT! i havent really decided yet..
(30r better spool fer daily driving... 35r huge turbo! aha)
HELIX 860CC INJECTORS w/ WALBRO 225 FUEL PUMP
PERRIN FUEL RAIL? maybe.. dunno if i need it..
GRUPPE-S CARBON RADIATOR SHROUD
TRANS-
ACT HD 6-PUCK
ACT STREETLIGHT FLYWHEEL
SUSPENSION-
CUSCO FRONT/REAR STRUT TOWER
CUSCO 22mm SWAY FRONT/REAR(3 way adjustable)
THINGS NOT PICKED-
engine manegment: turboxs UTEC/cobb tunning access port??
boost controller
oil cooler kit?
engine internals!?!
gauges!!!!
oh, and a daily driver if this thing get outta control.. lmao
ON THE CAR ALREADY-(all that will be left will be the tiens, and the harness's)
HKS BOV
INJEN SHORT RAM
TIEN SUPER STREET DAMPER
TAKATA RACING HARNESS(pair left over from old car)
PLZ KEEP IN MIND THIS IS MY FIRST SUBIE, SOo DONT BE TOO CRITICAL!
HOPEFULLY ILL HAVE ALL THIS DONE BY JANUARY 07! THATS MY GOAL!
THANX
KOLI IOKEPA(OR CORY)
EXHAUST-
HELIX CAT BACK-stainless mendrel bent
GRUPPE-S V2 MANIFOLD-stainless mendrel bent
ENGINE-
PERRIN FRONT MOUNT
PERRIN GT30 or GT35 KIT! i havent really decided yet..
(30r better spool fer daily driving... 35r huge turbo! aha)
HELIX 860CC INJECTORS w/ WALBRO 225 FUEL PUMP
PERRIN FUEL RAIL? maybe.. dunno if i need it..
GRUPPE-S CARBON RADIATOR SHROUD
TRANS-
ACT HD 6-PUCK
ACT STREETLIGHT FLYWHEEL
SUSPENSION-
CUSCO FRONT/REAR STRUT TOWER
CUSCO 22mm SWAY FRONT/REAR(3 way adjustable)
THINGS NOT PICKED-
engine manegment: turboxs UTEC/cobb tunning access port??
boost controller
oil cooler kit?
engine internals!?!
gauges!!!!
oh, and a daily driver if this thing get outta control.. lmao
ON THE CAR ALREADY-(all that will be left will be the tiens, and the harness's)
HKS BOV
INJEN SHORT RAM
TIEN SUPER STREET DAMPER
TAKATA RACING HARNESS(pair left over from old car)
PLZ KEEP IN MIND THIS IS MY FIRST SUBIE, SOo DONT BE TOO CRITICAL!
HOPEFULLY ILL HAVE ALL THIS DONE BY JANUARY 07! THATS MY GOAL!
THANX
Last edited by cordeezle06sti; 07-23-2006 at 06:28 PM.
#2
Registered User
iTrader: (4)
Join Date: Oct 2004
Location: West Seattle.
Posts: 851
Car Info: '13 WRX Hatch OBP
Sounds like you already have a plan, what kind of suggestions are you looking for? For engine management, I might check out element tunning
http://www.elementtuning.com/main.htm
I'd say learn to drive your car first before you start going all out on it. And if your gonna go with that huge turbo engine internals is a must. I know some people over here (Washington) that have blown their engine with that turbo. So just to be safe I would build a nice strong bottom end.
http://www.elementtuning.com/main.htm
I'd say learn to drive your car first before you start going all out on it. And if your gonna go with that huge turbo engine internals is a must. I know some people over here (Washington) that have blown their engine with that turbo. So just to be safe I would build a nice strong bottom end.
#4
Registered User
iTrader: (7)
Join Date: Aug 2004
Location: Kalihi
Posts: 800
Car Info: easystreet's ESX 344 Stage 4 Dyno Tuned
Originally Posted by 91sleeper
don't plan on doing too much driving with those injectors. between gas and the car payment your gonna have to live in your car.
cant agree more i have PE 800cc in my 2.0 and sadly enough a get 170-200 miles per tank, i do open it up once in awhile but gas is killing me. I would suggest an ECU program that will allow you to switch from "Dont F with me" to "Hey I get 400 per tank" hope everything goes well with your project!
#6
Registered User
iTrader: (21)
Join Date: Nov 2004
Location: "I am McLovin, The 27 yr old Hawaiian organ donor"
Posts: 2,507
Car Info: 2004 Java Black Pearl STI (Team DownXhift)
Originally Posted by 91sleeper
don't plan on doing too much driving with those injectors. between gas and the car payment your gonna have to live in your car.
j/k....IMO, go easy with the mods at first......take it little by little so that along the way, you can make a better judgement on which tuning path you want to take...... But........It always fun to slam everything on at once and have a MONSTER!!!
#8
Troll
iTrader: (5)
Join Date: Aug 2004
Location: ***10 SEC CLUB*** 10.8@128mph w/clutch issues
Posts: 3,526
Car Info: 04 STI--- 435awhp@Pump Gas **520awhp @ C16 Vp
Originally Posted by Hoppie
Sounds like you already have a plan, what kind of suggestions are you looking for? For engine management, I might check out element tunning
http://www.elementtuning.com/main.htm
I'd say learn to drive your car first before you start going all out on it. And if your gonna go with that huge turbo engine internals is a must. I know some people over here (Washington) that have blown their engine with that turbo. So just to be safe I would build a nice strong bottom end.
http://www.elementtuning.com/main.htm
I'd say learn to drive your car first before you start going all out on it. And if your gonna go with that huge turbo engine internals is a must. I know some people over here (Washington) that have blown their engine with that turbo. So just to be safe I would build a nice strong bottom end.
Hydra Nemessis II
Cant go wrong~!!!!!! Pricey but worth it....
#9
Troll
iTrader: (5)
Join Date: Aug 2004
Location: ***10 SEC CLUB*** 10.8@128mph w/clutch issues
Posts: 3,526
Car Info: 04 STI--- 435awhp@Pump Gas **520awhp @ C16 Vp
I would recommend get atleast rear axles from the www.thedriveshaftshop.com you will need them... Also a great boost controler,, Blitz ID III Elect. Boost Cont.
;;;;;;
If you havent done it yet,,,If you going big,,,be better off, with the 1000cc fuel injectors, and 2 walbro fuel pumps 255psi, and a fuel regulator,,,,, Thats what Im doing right now,,,
Good luck on your project,,,,post pics and clips,,,from start to finish on that Hawaii Kai AWD street beast!!!!
Thanks...
;;;;;;
If you havent done it yet,,,If you going big,,,be better off, with the 1000cc fuel injectors, and 2 walbro fuel pumps 255psi, and a fuel regulator,,,,, Thats what Im doing right now,,,
Good luck on your project,,,,post pics and clips,,,from start to finish on that Hawaii Kai AWD street beast!!!!
Thanks...
#10
Troll
iTrader: (5)
Join Date: Aug 2004
Location: ***10 SEC CLUB*** 10.8@128mph w/clutch issues
Posts: 3,526
Car Info: 04 STI--- 435awhp@Pump Gas **520awhp @ C16 Vp
Originally Posted by 91sleeper
don't plan on doing too much driving with those injectors. between gas and the car payment your gonna have to live in your car.
jajajaja,,, Good point,,,
But:
Back home I remember I used to work just for my car(rx7),,,and it has paid off(after 9yrs) its an 8 sec. car at 1/4mile,,,thanks to my little brodah, who continued that project,,,but anyways,, I would just have enough for gas and for racing,,, and that was the only thing I was worried about.
Now:
,,,, Well Im doing a similar / bigger project than he is, and I have taken everything in consideration, with my STI, and it will be painful in our pockets, but as long as we are happy and Im not putting the family at risk, due to all the cost of gas for the car,,, I'm happy, Fam. Happy, especially the wifey, will be happy,,, lol
thanks,,,just my 02.cents
#11
Troll
iTrader: (5)
Join Date: Aug 2004
Location: ***10 SEC CLUB*** 10.8@128mph w/clutch issues
Posts: 3,526
Car Info: 04 STI--- 435awhp@Pump Gas **520awhp @ C16 Vp
Originally Posted by Hoppie
and if your gonna go with that huge turbo engine internals is a must. I know some people over here (Washington) that have blown their engine with that turbo. So just to be safe I would build a nice strong bottom end.
^^^***Good advice***^^^
I would go with Forged internals, ie,,
Pistons, Rods, valves, and TGV deletes= $1700
#12
thanx guys
and for all the good advice.. the answer is money isnt to much of a problem, ill prolly go smaller injectors with the 30r, an ecu so i can go back and forth between race and daily drive, and im going to slowly add stuff... do it in stages... yea kno!!!! and believe me i am getting used to driving my car.. late night, in open areas... wish the track was open tho... i could see how far i can take my car, where all i have to worry about hittin are some cones!!! thanx again guys, always a great help!!
CORY
see you on the 30th!
CORY
see you on the 30th!
#13
Originally Posted by skoolboi
and for all the good advice.. the answer is money isnt to much of a problem, ill prolly go smaller injectors with the 30r, an ecu so i can go back and forth between race and daily drive, and im going to slowly add stuff... do it in stages... yea kno!!!! and believe me i am getting used to driving my car.. late night, in open areas... wish the track was open tho... i could see how far i can take my car, where all i have to worry about hittin are some cones!!! thanx again guys, always a great help!!
CORY
see you on the 30th!
CORY
see you on the 30th!
this is cordeezle06sti.. im signed in on my roomates i-club.. didnt even notice.. oops