LF- 05 STI parts or car
#1
Registered User
Thread Starter
iTrader: (16)
Join Date: Jun 2004
Location: mid-atlantic/va
Posts: 3,823
Car Info: 09 xt
LF- 05 STI parts or car
MODS, please move to classifieds i guess.
Need entire drivetrain, hubs, knuckles, axles, etc.
Also looking for rear fender any color. Also a front sedan bumper so i can get some front sedan fenders. I would love wrb, but any color would do i guess.
If this car had the motor i'd consider it and the trans as well.
thanks!
Need entire drivetrain, hubs, knuckles, axles, etc.
Also looking for rear fender any color. Also a front sedan bumper so i can get some front sedan fenders. I would love wrb, but any color would do i guess.
If this car had the motor i'd consider it and the trans as well.
thanks!
Last edited by 808subaru; 03-27-2009 at 06:45 PM.
#3
Registered User
iTrader: (4)
Join Date: Nov 2002
Location: KPT
Posts: 334
Car Info: 2011 KTM 530 EXC Supermoto
If you're looking for a reputable vendor:
subarugenuineparts.com sell oem parts at a lower price than other vendors or dealerships that I've come accross.
https://www.subarugenuineparts.com/oe_parts_cat.html
IA Performance sold me a rear end in the past. I'm not too sure if they still sell used drivetrain parts, but it's worth a try.
(520) 882-2821
subarugenuineparts.com sell oem parts at a lower price than other vendors or dealerships that I've come accross.
https://www.subarugenuineparts.com/oe_parts_cat.html
IA Performance sold me a rear end in the past. I'm not too sure if they still sell used drivetrain parts, but it's worth a try.
(520) 882-2821
#6
Registered User
iTrader: (4)
Join Date: Nov 2002
Location: KPT
Posts: 334
Car Info: 2011 KTM 530 EXC Supermoto
No problem Chris.
Check this site out too. They sell the 5x114.5 conversion in a package.
http://www.6gunracing.com/products.asp
It's too bad I found the website right after I purchased the DSS shafts for an 04. I would have loved to do the 5x114.5 conversion too.
Good luck on your project
Check this site out too. They sell the 5x114.5 conversion in a package.
http://www.6gunracing.com/products.asp
It's too bad I found the website right after I purchased the DSS shafts for an 04. I would have loved to do the 5x114.5 conversion too.
Good luck on your project
#7
Registered User
iTrader: (4)
Join Date: Nov 2002
Location: KPT
Posts: 334
Car Info: 2011 KTM 530 EXC Supermoto
Oh snap. I just looked at the DSS level 5 axles for the 02-07 WRX. It includes the upgrade hub kit to accomodate the larger splines. This way you don't have to buy the 5x114.5 conversion. But, you would still be stuck with the 02-07 WRX/04 STI wheel bearings.
I'm not too sure if I have the hub upgrade with my axles; I haven't really taken a good look at my car since December 2007. Maybe Ryan, Davin, or Jimi can take a look for me and verify? You're also more than welcomed to look at my parts if you are interested in going that route. The car is at R&D.
I'm not too sure if I have the hub upgrade with my axles; I haven't really taken a good look at my car since December 2007. Maybe Ryan, Davin, or Jimi can take a look for me and verify? You're also more than welcomed to look at my parts if you are interested in going that route. The car is at R&D.
Thread
Thread Starter
Forum
Replies
Last Post
td-garage
NorCal Classifieds
47
03-26-2012 09:28 AM
1FSTREX
NorCal Classifieds
0
09-23-2007 01:54 PM
stealth-wrx
Engine/Power - EJ20T (pre-2006 WRX and JDM)
8
08-17-2004 07:00 PM