HRP Timeslip w/ Stage zero XEDE!
#1
Guest
Posts: n/a
HRP Timeslip w/ Stage zero XEDE!
Wassup!
Just wanted to let you all know what I ran tonight w/ a Vishnu XEDE Stage SubZero 93 octane MAP, with a QTP downpipe (closed bypass) running thru the stock STi exhaust. Car #88
60ft - 1.671
1/8 ET - 8.160
1/8 MPH - 85.36
1/4 ET - 12.940
1/4 MPH - 103.42
That was my second run, my first was a 13.11 @ 103mph, w/ a 1.8xxx 60 ft
JT
Just wanted to let you all know what I ran tonight w/ a Vishnu XEDE Stage SubZero 93 octane MAP, with a QTP downpipe (closed bypass) running thru the stock STi exhaust. Car #88
60ft - 1.671
1/8 ET - 8.160
1/8 MPH - 85.36
1/4 ET - 12.940
1/4 MPH - 103.42
That was my second run, my first was a 13.11 @ 103mph, w/ a 1.8xxx 60 ft
JT
#10
Registered User
iTrader: (38)
Join Date: Feb 2004
Location: mr. police officer,im not as think as you drunk i am....
Posts: 1,361
Car Info: 02 wrx
Originally Posted by keirnna
I hate you! ! Well I'll show everyone what the 11's look like next week!
I'm hoping i can do the same with my upgrade....... In two weeks.
#13
Guest
Posts: n/a
Hmmmmm.....since keirnna says he'll be posting 11 second slips this friday, I might as well skip a step and switch over to a 97 octane stage 1 map, along with my exhaust xpass! should add a total of 41+WHP to the current setup I had this past friday! Hopefully I wont lose too bad against him with his monster setup! Worst case scenario - probably run 93 octane map stage 1 map w/ an open xpass....
JT
JT
#15
VIP Member
iTrader: (8)
Join Date: Nov 2003
Location: Okinawa, Japan
Posts: 2,659
Car Info: 1996 STI V3 Type RA
I will not be running on friday for sure, and possibly test run on Saturday. I am not expecting to be fully operational for at least week. It will take a while to get everything tested and tunned properly. I should be running for sure in 2 weeks, but we'll see.