"clunking" noise from STi strut possible fix...
#1
Registered User
Thread Starter
iTrader: (18)
Join Date: Apr 2004
Location: HNL, HI and behind a viewfinder :D
Posts: 2,841
Car Info: 2011 White Forester.
"clunking" noise from STi strut possible fix...
As the title said, I had this problem before and now it is gone for 3 days counting...
Found a possible fix on Nasioc:
http://forums.nasioc.com/forums/show...ghlight=clunck
Basically, lift up your car, the plastic cover on the strut will allow you to spray some silicon or grease on the shaft/ piston, then let it sit for 10 min around (while the rim still in the air). Later, test drive your car to check for the noise. It works for me so far... hope it does not come back
Found a possible fix on Nasioc:
http://forums.nasioc.com/forums/show...ghlight=clunck
Basically, lift up your car, the plastic cover on the strut will allow you to spray some silicon or grease on the shaft/ piston, then let it sit for 10 min around (while the rim still in the air). Later, test drive your car to check for the noise. It works for me so far... hope it does not come back
#8
Registered User
Thread Starter
iTrader: (18)
Join Date: Apr 2004
Location: HNL, HI and behind a viewfinder :D
Posts: 2,841
Car Info: 2011 White Forester.
Agree
Originally Posted by Mystic_88
Check your sway bar too...
Could cause noise when you go up and down a bump...
Could cause noise when you go up and down a bump...
#9
Registered User
iTrader: (3)
Join Date: Sep 2003
Location: town / kaneohe
Posts: 4,499
Car Info: gc w/ neons and a wrx that needs neons
to get rid of the clunking you should swap it out with a strut and spring from a well used 04 wrx that makes no such noise.
i'll be a good friend and take one for the team... i'll take your noisy set up
i'll be a good friend and take one for the team... i'll take your noisy set up
#10
Registered User
Thread Starter
iTrader: (18)
Join Date: Apr 2004
Location: HNL, HI and behind a viewfinder :D
Posts: 2,841
Car Info: 2011 White Forester.
Originally Posted by namakemono
to get rid of the clunking you should swap it out with a strut and spring from a well used 04 wrx that makes no such noise.
i'll be a good friend and take one for the team... i'll take your noisy set up
i'll be a good friend and take one for the team... i'll take your noisy set up
#12
Originally Posted by namakemono
to get rid of the clunking you should swap it out with a strut and spring from a well used 04 wrx that makes no such noise.
i'll be a good friend and take one for the team... i'll take your noisy set up
i'll be a good friend and take one for the team... i'll take your noisy set up
aw shucks, i got an 05 lol
Thread
Thread Starter
Forum
Replies
Last Post
Gregsbluerex
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
07-25-2004 11:11 AM
thejean
Suspension, Handling, and Brakes
0
05-09-2004 12:06 PM