can anyone asst. me w/ some wiring
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2002
Location: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Posts: 2,859
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
can anyone asst. me w/ some wiring
hello all does anyone have any experince w/ wiring an aftermarket head unit that could possibly walk me through this. i took the unit from my integra and when i looked at the harness to the car wiring all the colors pretty much matched up so is it that easy to just match colors or is there more to it than that. thanks guys
#3
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2002
Location: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Posts: 2,859
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
Hmmm where do i get that harness and how does it work into an after market head unit
#7
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2002
Location: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Posts: 2,859
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
ok u guys are my gospal i'll go to a shop pic up a harness and ill see how it go s from there thanks alot guys.
#9
Originally posted by EtchyLives
If you go to Circuit Citry, you can get two harnesses. One specifically for your radio, and one specifically for your car. Completely plug and play. Should run you ~$30.
If you go to Circuit Citry, you can get two harnesses. One specifically for your radio, and one specifically for your car. Completely plug and play. Should run you ~$30.
#10
Registered User
iTrader: (4)
Join Date: Dec 2002
Location: Southern California
Posts: 2,176
Car Info: 2016 Z51 C7, 2007 Exige S, 2008 ZX-10R, 2016 Taco
mario,
I did my head unit, CD changer, speakers, amps, 5 farad cap, cut holes in the rear doors, modified the panels, the whole nine yards. Let me know if you need a hand.
San
San
#11
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2002
Location: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Posts: 2,859
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
hey oldmansan thanks for the offer i'm heading over to circut city tommorrow to see if they have the harnesses i need. but if that doesn't work out i'll be here cryng here right after that . thanks again
#12
same here i did a stereo change out in my car myself. just ask for some help and i can help out. if you want to cut the wires one of the two mod sites has the pin outs for the car. that is what i used to help reference when i cut the wires for my deck saving me some time. but i think one of the wires on that site was wrong since i was double checking it as i went along.
Thread
Thread Starter
Forum
Replies
Last Post
sumpunkster
Subaru General
0
03-04-2009 12:53 AM
2BturbodOutback
Pacific Northwest
2
07-02-2003 11:00 PM