anybody available to play tomorrow?
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: KAPOLEI, HI
Posts: 780
Car Info: 2004 WRX Wagon JAVA BLACK PEARL
anybody available to play tomorrow?
im installing coilovers. offer is still there. come down and help out or laugh at me and beer and food will be free. my instructions came in japanese. i dont know japanese so it should be interesting. if you want to join me ph# is 7144205659,
eric
eric
#5
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: KAPOLEI, HI
Posts: 780
Car Info: 2004 WRX Wagon JAVA BLACK PEARL
no air tools but i do have tools ill probably go buy a torque wrench in the morning. and i do have a covered area. umm i dunno what time i was gonna start. prolly early like 9 or 10 so i can be finished before dark. (haha it might take me a while.)
#8
Registered User
iTrader: (33)
Join Date: Nov 2002
Location: Boostin' troubles away - 4EAT Memories 12.87@103.2
Posts: 10,455
Car Info: 51E LHD V7 STI (2.0)
yes you can get through this without airtools... I'm not sure I can help you now since you'll be doing it in the morning and I have to work.
What I do recommend you do is research the installation at: http://www.scoobymods.com/
what type of suspension do you have? If it's Teins then you'll probably find it at scoobymods. If it's something else the installation if VERY similar if not the same!
I would recommend if you are going to purchase tools for tomorrow... you should pick up a 1/2" drive breaker bar (not to long and not to short). The reason being is because the longer the shaft the more torque you'll get on the bolts. However if the shaft is to long then you won't be able to use it for this project. Also since you'll be purchasing tools... you'll also need to get 1/2" drive sockets.
Make sure you have WD40 or penatrating oil (or equivalent) to make the job easier for braking the bolts off from the strut.
I would start as early as possible and make sure to eat a good breakfast (not to much other wise you'll be a lazy ***!)
You'll also need 12mm & 14mm sockets (can be 3/8" drive)
Good luck!
Jon
What I do recommend you do is research the installation at: http://www.scoobymods.com/
what type of suspension do you have? If it's Teins then you'll probably find it at scoobymods. If it's something else the installation if VERY similar if not the same!
I would recommend if you are going to purchase tools for tomorrow... you should pick up a 1/2" drive breaker bar (not to long and not to short). The reason being is because the longer the shaft the more torque you'll get on the bolts. However if the shaft is to long then you won't be able to use it for this project. Also since you'll be purchasing tools... you'll also need to get 1/2" drive sockets.
Make sure you have WD40 or penatrating oil (or equivalent) to make the job easier for braking the bolts off from the strut.
I would start as early as possible and make sure to eat a good breakfast (not to much other wise you'll be a lazy ***!)
You'll also need 12mm & 14mm sockets (can be 3/8" drive)
Good luck!
Jon
#11
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: KAPOLEI, HI
Posts: 780
Car Info: 2004 WRX Wagon JAVA BLACK PEARL
hey thanks jon. i got the zero2rs btw. ive been asking around to see if anybody has their installation instructions bcuz i assumed it would be pretty similar. tool list will be a big help. ill be on it all day so if you do wanna swing by just gimme a call. thanks again.
eric
eric