*Question About Coolant*
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Honolulu
Posts: 317
Car Info: hard in the paint!!!
*Question About Coolant*
quick question - i just flushed my engine coolant today because it was beyond dirty x2!! i flushed with Carquest 10 min flush then added Carquest anti rust and water pump lubricant additive to the Prestone coolant. Was it a good idea to add extra fluids? obviously it's too late...
#3
Nobody really seems to use that stuff.... i just use straight up coolant, but you pretty much put something like (pic) this in there IF it was made for aluminum parts. i wouldnt have used the lubricant tho...
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Honolulu
Posts: 317
Car Info: hard in the paint!!!
^ the lubricant was already mixed in with the anti-rust liquid. the color came out milky white which diluted the coolant. by adding this already, it won't hurt anything right?
if worst comes to worst, should i drain and redo?
if worst comes to worst, should i drain and redo?
#7
LOL thats what i meant, i fugured most knew it should be mixed with distilled water.... tap water and bottled water will cause corrosion as well....
#8
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Honolulu
Posts: 317
Car Info: hard in the paint!!!
i ended up re-flushing and re-adding new coolant.
during work today, i went over to performance radiator down by mapunapuna... the lady sort of yelled at me in a humorous way for putting in the anti-rust additive LOL.
much mahalos to everyone, dumb question and actions i know!! aloha
during work today, i went over to performance radiator down by mapunapuna... the lady sort of yelled at me in a humorous way for putting in the anti-rust additive LOL.
much mahalos to everyone, dumb question and actions i know!! aloha
Thread
Thread Starter
Forum
Replies
Last Post
VRT MBasile
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
09-29-2008 10:57 AM
WindCloud
Hawaii
6
08-05-2004 01:08 AM