New Product: Link Knock Link Display w/ Acessport Combo!

Thread Tools
 
Search this Thread
 
Old 09-08-2005 | 07:51 PM
  #1  
gruppe-s's Avatar
Thread Starter
Registered User
iTrader: (22)
 
Joined: Nov 2002
Posts: 4,528
From: Hayward, CA
New Product: Link Knock Link Display w/ Acessport Combo!

Hey all,

As suggested by Mike, we just picked up a pretty cool new product:

Most modern engines will already have a knock sensor fitted as standard, but any type of knock sensor may be fitted as required. The sensor is normally screwed into a boss on the engine block although some manufacturers fit the sensor in the inlet manifold (especially Ford). In either case, the sensor must be in such a position that block vibrations are coupled to the sensor.
Assuming the engine is operating correctly, the LEDs will show only background noise which will rise in proportion to engine power output. Any abrupt rise in signal level at any time is an indication that detonation is occurring. The immediate remedy is to close the throttle. Severe detonation will destroy any engine in seconds.

Knocking is the self detonation of the unburnt fuel in the combustion chamber toward the end of combustion. The flame burns abound ten times faster than normal causing huge pressures. Possible cures for knocking are: cooler intake air; increased intake humidity; reduce load; increase RPM; enrichen or lean engine from lambda stoichiometric; improve spark; increase octane level of fuel; reduce total ignition advance etc.

-Monitor engine “Noise”.
-Optimise advance.
-Detect Detonation.
-Mechanical or Electronic Ignition.
-Toolbox tool or permanent fit.




We are offering the following package:

-Cobb Accessport
-1 Custom Map for your car tuned by Mike (must be standard bolt on modifications)
-Link Knock Link
-Installation


$999 OTD (includes tax!) for WRX
$1049 OTD (includes tax!) for STi


Thanks,

Geoff
geoff@gruppe-s.com

Last edited by gruppe-s; 09-12-2005 at 01:48 PM.
Old 09-09-2005 | 03:12 PM
  #2  
gruppe-s's Avatar
Thread Starter
Registered User
iTrader: (22)
 
Joined: Nov 2002
Posts: 4,528
From: Hayward, CA
Also, I forgot. If you just want the Knock Link, the price for that is $209 shipped.

Thanks,

Geoff

Last edited by gruppe-s; 09-12-2005 at 01:48 PM.
Old 09-10-2005 | 10:06 PM
  #3  
eclipse0001's Avatar
Registered User
 
Joined: Sep 2003
Posts: 132
From: New Castle, PA
Car Info: 02 WRX
sounds interesting, how hard is it to install a knock link?
Old 09-11-2005 | 10:37 PM
  #4  
ej20s17's Avatar
Registered User
 
Joined: Jan 2004
Posts: 27
From: Las Vegas
Car Info: 04 PSM WRX
I have ECUtek. I have been lookin into a knock link. How would I install that in my car? thanks.
Old 09-12-2005 | 01:49 PM
  #5  
gruppe-s's Avatar
Thread Starter
Registered User
iTrader: (22)
 
Joined: Nov 2002
Posts: 4,528
From: Hayward, CA
Originally Posted by eclipse0001
sounds interesting, how hard is it to install a knock link?
It's not all that difficult but the intake manifold does have to be removed to attach the knock sensor to the block.

Thanks,

Geoff
Old 09-12-2005 | 02:05 PM
  #6  
gruppe-s's Avatar
Thread Starter
Registered User
iTrader: (22)
 
Joined: Nov 2002
Posts: 4,528
From: Hayward, CA
Also, the posted price before lacked the knock sensor. The price has been adjusted to reflect the inclusion of the knock sensor. Sorry about that.

Geoff
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rivers
Sacramento & Reno
24
10-07-2009 05:35 PM
Kevin M
Sacramento & Reno
1
01-26-2007 04:32 PM
gruppe-s
NorCal Classifieds
5
09-10-2005 03:36 PM
RavSpec
Vendor Group Buys/Specials
1
02-06-2004 09:07 AM



Quick Reply: New Product: Link Knock Link Display w/ Acessport Combo!



All times are GMT -7. The time now is 09:41 PM.