MY01 2.5RS Mod Suggestions

Reply Subscribe

Thread Tools

Search this Thread

01-08-2003 | 02:00 PM

#16

Pocon

Registered User

Joined: Nov 2002

Posts: 27

From: Toronto, Ontario, Canada

Car Info: 1999 Impreza 2.5 RS - MTS

Guys, don't forget... ECU tuning at the end.

That will sum things up and make your sensors and computer happy. Just be cautious, adding headers to a MY00 and up causes CELs to come up once in
a while. Even on my MY99 OBD code P0420 came on last month. Subaru computers are very sensitve.

01-08-2003 | 06:42 PM

#17

N/ABeast

Guest

Posts: n/a

Well, so far I have a Ganzflow, K&N, PROECM, Stromung Catback, Kartboy with Momo Airleather, 20MM Rear Swaybar, Whiteline Lock Kit, Hawker Battery, and some other mods. I've also removed about 150 lbs of weight off of my car. My cars pretty quick, but I have to get some Borlas, a Cobb Cat, Cobb Street Cams, N1 Style Pulleys, Fidenza 9 Lb Flywheel, and a ACT Clutch, and I may be happy.

02-06-2003 | 09:58 AM

#18

Nemnith

Guest

Posts: n/a

Thanks again.

I'm now leaning towards a Cobb CAI and catback exhaust. Anyone have any suggestions/comments about them?

I'm also looking into getting the Cobb shift bushings and upgraded tranny mount. Good idea, or waste of money?

Another mod I've seen a few people mention was the lightweight pulley kit, which I'm going to get from vividracing.com. Will that actually boost hp, or just make the car idle lower and shift smoother? Any suggestions/comments about that mod?

Thanks in advance...

02-10-2003 | 04:47 PM

#19

zoinkssooby

Guest

Posts: n/a

the pullies add power. how much depends on what else you have done. i believe the number to be... for every 1lb lost at the crank you gain 2.7hp (at the crank?) corrections are welcome.

03-11-2003 | 06:13 AM

#20

Nemnith

Guest

Posts: n/a

Anyone have anything else to add? How about the bushings and tranny mount? Anyone have good/bad experience with either of those?

Anyone know the deal with the pulley "kit" at vividracing.com? It replaces all three pulleys. Is that necessary? Sounds like most people are only replacing one.

Thanks again.

03-12-2003 | 10:49 PM

#21

joltdudeuc

Old School

iTrader: (6)

Joined: Jan 2001

Posts: 14,983

From: Union City

Car Info: '99 RBP GM6

Catback: Stromung midpipe, and dual tip axleback

Your scoop intake should be fine...

Headers: TWE will make the most power, but you'll lose deep boxer sound, and get a nice, RPM like race sound.. still boxer, but not deep. To get a little more power, but an AWESOME sound, go borlas.

Pulleys: replace with N1s, they aren't shorter diameter, they are lightweights.

Really, that's about it. Your car would sound really awesome. If you want to replace the cats, do so with 1 or 2 hi flow units, like Random tech. but stock should be fine really.

have fun, and watch your shifting into 2nd gear

-Gagan

03-13-2003 | 03:53 AM

#22

Scubaru

Registered User

iTrader: (1)

Joined: Nov 2002

Posts: 1,051

From: In Dad's garage.

Car Info: MY02 GD WAGON, MY87 AW11

Do a tune up before any mods are done. Synthetic fluid, plugs, wires, etc.....Gotta make sure to get the basics done first

-scu

03-13-2003 | 11:07 AM

#23

N/ABeast

Guest

Posts: n/a

Well, I changed plans for my car and I'm going to put an arm and a leg out since I won't go turbo. Heres what I have:

Ganz w/ K&N - Replacing with Cobb CAI
Stromung Catback w/ Kartboy Hangers
20MM FHI Rear Swaybar
Kartboy Shifter w/ Momo Airleather
Sparco Pedals
PROECM Chip
Hawker 13 lb battery
Mr Joshs Pulley
Kuhmo Ecsta 712s

And heres what Im doing with my car:

Exedy 9 lb flywheel
Cobb Clutch
A Mystery Companies Cams (More aggressive than Cobb or JA HP)
5.5g titanium retainers and valvesprings
Brullen Headers
Bored TB
Ported Heads (Not Cobb)
SS Brake Lines
Koni Inserts
Cobb Springs
LW Bumper Beams
ECU Tuning and 8000 RPM Redline

Any more suggestions?

03-13-2003 | 11:07 AM

#24

N/ABeast

Guest

Posts: n/a

03-13-2003 | 10:56 PM

#25

Scubaru

Registered User

iTrader: (1)

Joined: Nov 2002

Posts: 1,051

From: In Dad's garage.

Car Info: MY02 GD WAGON, MY87 AW11

If you are going to open the block, how about throwing in some High Comp pistons to complement the heads, cams, 8000rpm, etc? That way you only have to tear down once....that should be it for the mods until you go bananas and do the bottom end up. Also maybe extude hone the intake as well as port match it to the TB and heads, maybe larger injectors and and upgraded fuel system such as Fuel pump and Vishnu fuel rails?

-scu

Last edited by Scubaru; 03-13-2003 at 10:58 PM.

09-26-2003 | 09:54 AM

#26

Nemnith

Guest

Posts: n/a

Anyone else have anything to add?

Thx.

09-26-2003 | 11:09 AM

#27

AWD OWNZ U

Registered User

Joined: Nov 2002

Posts: 706

From: Atlanta, GA

Car Info: 2000 2.5RS

Cobb intake/pulleys/catback of your choice. It'll give you a little extra punch and make it a more fun car to drive. Start with that, if you feel you need more, you can always do it.

JC