VF 24 or VF35
#1
VF 24 or VF35
I have been planning my setup for a couple of weeks now, and I am debating
what would be best. I am not looking for a lot of power in the high end
so I won't doing highway pulls. Basiclly I am looking for low end to mid range
power. WHP 235-250 This what I am in the process of doing:
ITG Filter
GFB BOV or (Forged BOV Bling!)
MRT Top Mount
Samco Intercooler Hoses
Perrin Turbo Inlet Hose
Scoobysport Stage 2 Exhaust (w/twin tip exhaust)
Ecutek Reflash (2 fuel maps one for econo and other for fun )
Vishnu pulleys
(this stuff comes first, turbo and fuel upgrade come later)
I did research on the VF24 and VF35 still don't know which to use, your insite would be appreciated.
PS. I love the board , lots of info, been on the board for a two years,never
really post just ready alot of info.
what would be best. I am not looking for a lot of power in the high end
so I won't doing highway pulls. Basiclly I am looking for low end to mid range
power. WHP 235-250 This what I am in the process of doing:
ITG Filter
GFB BOV or (Forged BOV Bling!)
MRT Top Mount
Samco Intercooler Hoses
Perrin Turbo Inlet Hose
Scoobysport Stage 2 Exhaust (w/twin tip exhaust)
Ecutek Reflash (2 fuel maps one for econo and other for fun )
Vishnu pulleys
(this stuff comes first, turbo and fuel upgrade come later)
I did research on the VF24 and VF35 still don't know which to use, your insite would be appreciated.
PS. I love the board , lots of info, been on the board for a two years,never
really post just ready alot of info.
#5
I have a VF35 and love it - if not for my idiot installer who put it in without prelubing it - but it gets full 18psi boost by 4000RPM. VF35 has a small exh side like the stocker - but large compressor side like VF30/34.
I wouldnt waste money on these (my opinion) - they are questionable, minimal bang-for-the-buck, or just plain useless.
ITG Filter
GFB BOV or (Forged BOV Bling!)
Perrin Turbo Inlet Hose
Vishnu pulleys
Samco Intercooler Hoses
I bet all these items = about $800, that pays for your turbo.
I assume the exhaust includes a catless uppipe, if not that should be your FIRST mod.
Scoobysport Stage 2 Exhaust (w/twin tip exhaust)
Ecutek Reflash (2 fuel maps one for econo and other for fun )
MRT Top Mount
Im running with stock scoop and IC and a TXS UTEC.... it Goes ! A larger scoop, IC and a dyno tune would probably eke out another 20-25 hp but its not worth the $2K it would require...
I wouldnt waste money on these (my opinion) - they are questionable, minimal bang-for-the-buck, or just plain useless.
ITG Filter
GFB BOV or (Forged BOV Bling!)
Perrin Turbo Inlet Hose
Vishnu pulleys
Samco Intercooler Hoses
I bet all these items = about $800, that pays for your turbo.
I assume the exhaust includes a catless uppipe, if not that should be your FIRST mod.
Scoobysport Stage 2 Exhaust (w/twin tip exhaust)
Ecutek Reflash (2 fuel maps one for econo and other for fun )
MRT Top Mount
Im running with stock scoop and IC and a TXS UTEC.... it Goes ! A larger scoop, IC and a dyno tune would probably eke out another 20-25 hp but its not worth the $2K it would require...
Thread
Thread Starter
Forum
Replies
Last Post
javier2971
Aftermarket Forced Induction - Turboed factory NA engines
9
01-28-2003 08:43 AM
AWDball
Aftermarket Forced Induction - Turboed factory NA engines
3
12-17-2002 08:26 PM
AWDball
Aftermarket Forced Induction - Turboed factory NA engines
0
12-17-2002 12:07 PM