uppipe with no egt bung??
#2
Registered User
Join Date: Nov 2002
Location: -----------------
Posts: 857
Car Info: .............................................................................
I wonder how many times this is going to be asked???
Do a search and there are lotsa posts on it.
CEL...yes.....easy to fix....yes.
Do a search and there are lotsa posts on it.
CEL...yes.....easy to fix....yes.
#3
Chewwwwy
iTrader: (5)
Join Date: Nov 2002
Location: Fremont
Posts: 3,399
Car Info: Random, yet well planed selection of jdm cult cars
Originally posted by Uncle Scotty
I wonder how many times this is going to be asked???
Do a search and there are lotsa posts on it.
CEL...yes.....easy to fix....yes.
I wonder how many times this is going to be asked???
Do a search and there are lotsa posts on it.
CEL...yes.....easy to fix....yes.
be nice...
yes it will throw a cel, but you can fix it with a resistor. 2.2k ohm 1/2 watt.
#4
There should have been a resistor 2.2k ohm 1/2 watt packed with the uppipe. If not just buy a one from an electronics store like radio shack.
Do a search on upipe Cel fix, and you should find the instructions on what to do.
Do a search on upipe Cel fix, and you should find the instructions on what to do.
#6
Registered User
Join Date: Nov 2002
Location: -----------------
Posts: 857
Car Info: .............................................................................
Sorry....I wish I could wiggle my nose and pop in and makee makee all fixee fixee....
Anybody in central florida wants their EGT CEL resistor installed, free....PM me.
Anybody in central florida wants their EGT CEL resistor installed, free....PM me.
#7
VIP Member
iTrader: (1)
Join Date: Nov 2002
Location: Plymouth, MN
Posts: 2,518
Car Info: 94 T-Leg Sedan and a 00 M5
Here is a thread that has pictures on how to do the resistor mod
It is pretty easy and straight forward. I noticed above that a 1/2 watt resistor was recommended. I used the 1/4 watt and it worked for me, but I know others that used the 1/2. Experimentation is the key to mental health... and if your car throws a CEL, then try the other resistor and reset it.
-Etch
It is pretty easy and straight forward. I noticed above that a 1/2 watt resistor was recommended. I used the 1/4 watt and it worked for me, but I know others that used the 1/2. Experimentation is the key to mental health... and if your car throws a CEL, then try the other resistor and reset it.
-Etch
#8
Former Sponsor
iTrader: (39)
If you brought it new then the Pipe comes with a resistor taped to the instructions, if you brought it used and need one PM me I'll send you one.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
Thread
Thread Starter
Forum
Replies
Last Post
ryball
Engine/Power - EJ20T (pre-2006 WRX and JDM)
2
09-19-2008 12:24 AM
AdamBOMB_STi
Used Aftermarket Car Parts For Sale
0
02-17-2007 10:29 AM