Turbo Xs turbo back
#1
Turbo Xs turbo back
I was looking into purchasing the turbo xs turbo back. Has anyone used this product, and is there a good increase in power. Also is the sound very loud, im looking for some sound but not anything to crazy. If the turbo xs is not good can you suggest something else.
#5
VIP Member
iTrader: (2)
Join Date: Nov 2002
Location: Longing for my ol' white '02 WRX :(
Posts: 3,639
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
Originally Posted by wrxed1266
So there is a good increase in power, and he sound is loud? Is the borla hush as good as the turbo xs or about the same
jason
#6
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
I have a TXS DP and cat pipe mated to a custom intermediate pipe and Stromung axle back (PITA to mate) and I love it. I did a reflash and upipe at the same time so I can’t say how much the exhaust by its self increased power.
I have heard the TXS TBE isn’t very loud as long as you don’t get the FRL (Real F'in Loud) version. One thing to remember is that the TXS DP/catted midpipe combo is longer than most so you will need to do some customizing to mate it to other cat backs. If you don’t mind going catless you can buy the cat back adaptor which is supposed to mate to most aftermarket CB's.
BTW, you could keep the oe axle back and bolt it up to a TXS stealth back. Here's a good place to see all of your options http://www.worldoneperformance.com/c...e.com/main.htm.
I have heard the TXS TBE isn’t very loud as long as you don’t get the FRL (Real F'in Loud) version. One thing to remember is that the TXS DP/catted midpipe combo is longer than most so you will need to do some customizing to mate it to other cat backs. If you don’t mind going catless you can buy the cat back adaptor which is supposed to mate to most aftermarket CB's.
BTW, you could keep the oe axle back and bolt it up to a TXS stealth back. Here's a good place to see all of your options http://www.worldoneperformance.com/c...e.com/main.htm.
#9
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
The Hush is a cat back. FYI the upipe is before the turbo. the DP connects to the mid pipe which connects to the cat back. Here's a diagram https://www.i-club.com/forums/attach...chmentid=26009
#11
Originally Posted by MO REX
The Hush is a cat back. FYI the upipe is before the turbo. the DP connects to the mid pipe which connects to the cat back. Here's a diagram https://www.i-club.com/forums/attach...chmentid=26009
Too many cats on the WRX...I cant wait to take them off.
#12
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
Originally Posted by wrxed1266
Thanx for the diagram, do u have any suggestions for a down and mid pipe then
Are you planning on going catless or do you want to run a high flow cat?
Thread
Thread Starter
Forum
Replies
Last Post
Sinister Subaru
Engine/Power - EJ20T (pre-2006 WRX and JDM)
5
03-03-2006 03:46 PM
shibits
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
02-28-2004 05:48 PM
fuzzycuffs
Engine/Power - EJ20T (pre-2006 WRX and JDM)
8
02-08-2004 06:38 AM
delmoral
Engine/Power - EJ20T (pre-2006 WRX and JDM)
0
11-20-2003 07:16 PM